Recent content by danishpasty

Hi Shinpachi. I hav'nt been around in such a long time. Very happy to see you are still working away on your beautiful project. Wishing you a belated Merry Christmas and Best Wishes for 2014. Rob.

Watching quietly with great admiration for your work. Happy New Year my friend, Rob.

Hi Shinpachi. Just e-mailed you some drawings. Let me know if there is a problem and I will get She Who Must Be Obeyed to help me send them tomorrow. Sending email is me pushing the I.T. envelope. Best Wishes, Rob.

I have measured the rear face of the cockpit section in the Imperial War museum in London and got the following dimensions: Height 1180mm Width across wing fillets 1036mm Width of widest point of fuselage (your 984mm) 962mm Distance of widest point bellow top of fuse ( your 637 ) approx...

Sorry I havn't replied to all you posts sooner and a big thankyou for all the help you have been posting. As Shinpachi says, ideally I am looking for CAD data, a table of offsets or drawings of fuselage cross sections at as many cross sections as possible. I have several good 3-views, the best...

All this information is so helpfull, thankyou so much. I will use the table of figures to put into my aerofoil programme to produce wing rib templates for cutting with cut outs for spars and lightening holes etc before cutting them from 3mm balsa wood and plywood. Do have, or can you point me...

Hi Shinpachi. Thanks for all the help. In the first drawing there are 2 lines running through the aerofoil, one horizontally and one at an angle though the chord line. Can you tell me the meaning of the Japanese characters on these 2 lines and explain the distance between them, i.e. 23.62mm on...

Hi all, my first post on here. I am drawing up plans to build a 1/4 RC model of an A6M3 and need details on the thickness taper of the wings (as viewed from the front, not from above). I have a drawing which shows the thickness at 500mm out from the centre line of the fuselage to be 14.4%...