Recent content by javlin

I have a Venezuela FN only have shot maybe 20rds through it looks as it was never fired hardly no corrosion ring on the face of the bolt same as my Mauser from Venezuela.Did the slam fire occur from a protruded primer or a stuck firing pin? I also have the Argentine Navy FN49 changed to the...

Thanks Geo she came out decent might try another one day just better decals I even think I have a Revell/Monogram in the stash one of the tails was not totally formed could scratch it. ;)

Another one hits the cabinet not as good as the Hustler but pretty decent.I was able to cut away the most offending out register decal on the L/tail area while on the plane straight edge/razor/water.One can still see some register problems on the yellow arches but at this point it is what it...

My first time Bill have used postit notes just would not stick and follow contours some 1/4" Tamy tape and foil was done in a snap. ;)

yes

So lets start with that the decals suck 1/2 of the yellows are out of register and the same with the stars and bars.The red stripes on the engine area were just to then all the decals are so off to painting.I am having to handle this A/C way to much broke off one of the fuel pods no biggie just...

I am moving slowly along on this one the LG's are in place kinda tricky all three!The LG's need to be built while stilling drying to get the proper alignment of three different actuator arms on the main gear and two on the front.The instructions are not the best in drawing or location and to do...

I just snagged up the 1/200 Bismark Chris going to be a while before I start though.The Scharnhorst 1/200 is about 70% complete doing rigging then to the rails. ;)

Thanks Glenn mine was about to be a hanger but I manged to fit her in the cabinet thanks for looking. ;)

Sorry for the late response guys busy week of work but appreciate all the positive comments. :salute:

Now I have the Trumpter 1/48 F-100C main color is Alclad #126High Shine AL. Rudder is Alclad #101 Basic AL..The tail are was first Alclad Exhaust manifold,Pale burnt metal a darker Burnt metal all applied in a vertical motion if I had a blue vary sparing some of that would of happened.I had to...

Went trough some of that from grade school to junior high. I fought every little POS who dared after the 5th grade to 7th(you could back then).I think it was by the 8th grade people stopped F@#$in with me a fight was coming and I was getting better.My Son had a problem in HS I told him "fight...

Thanks Fellas the F-100C I think is going to be better?

Thanks Wojtek it's been my teens since the last build she came out better.:salute: Thanks Donnie she has the look. ;)

I see the other AC in the sheet belongs to the 305th so is "Ginger" the 43rd?