Canso or PBY Catalina rear fuselage access replacing gun blisters (1 Viewer)

yduwelz

Airman
10
3
Joined
Jul 23, 2010
Canso or PBY Catalina rear fuselage access metal sheets replacing gun blisters

Hello,

I am searching for a drawing of the replacement sheet metal used the replace the rear fuselage blisters on civil version of Canso/catalina.

panneau12b.jpg

panneaux2.jpg


I plan to make a scale model of a catalina used in the past by the French Sécurité Civile and some aircraft of this organisation were modified in Canada this way.

Many thanks in advance
 
For the installation in your photo you probably need to track down all the FAA Supplemental Type Certificates for the Consolidated type 28 as your starting point and then see which Certificate holders still exist. You MAY be able to get STC copies from the FAA.
 
Canso or PBY Catalina rear fuselage access metal sheets replacing gun blisters

Hello,

I am searching for a drawing of the replacement sheet metal used the replace the rear fuselage blisters on civil version of Canso/catalina.

View attachment 903928
View attachment 903929

I plan to make a scale model of a catalina used in the past by the French Sécurité Civile and some aircraft of this organisation were modified in Canada this way.

Many thanks in advance
This is a 100% Canadian post-war modification as seen on several Cansos (those are amphibians only). The modifications were done by Aircraft Industries Limited around 1951.
I have similar photos of different birds. In your photo IMHO that a/c has been used for some geodetic measurements (the boom under the tail is some kind of a radar).
Here some examples of modified Cansos (check modified nose as well):
Canso 1.jpg

Canso 2.jpg

Canso 3.jpg

Canso 4.jpg

Canso 5.jpg

This IMHO is the same mod without the half-spherical window in the middle of the hatch. Note the fairing over the original opening - this is the lighter area in the above photos:
Canso 6.jpg

I don't have any drawings but I will check my archive for all Canso-articles and photos.
Source of photos: here.
Cheers!
 
This is a 100% Canadian post-war modification as seen on several Cansos (those are amphibians only). The modifications were done by Aircraft Industries Limited around 1951.
I have similar photos of different birds. In your photo IMHO that a/c has been used for some geodetic measurements (the boom under the tail is some kind of a radar).
Here some examples of modified Cansos (check modified nose as well):
View attachment 904051
View attachment 904052
View attachment 904053
View attachment 904054
View attachment 904050
This IMHO is the same mod without the half-spherical window in the middle of the hatch. Note the fairing over the original opening - this is the lighter area in the above photos:
View attachment 904049
I don't have any drawings but I will check my archive for all Canso-articles and photos.
Source of photos: here.
Cheers!
Thank you, exactly the illustrations of what drawings I am looking for. Regards
 
Geoterrex, if they still exist, may have the drawings as the lower aircraft in post 1 is one of theirs.
 
Geoterrex, if they still exist, may have the drawings as the lower aircraft in post 1 is one of theirs.
IMHO they were just the user. The mods have been done by others and for RCAF AFAIK, before some of those Cansos went into civil hands.
 

Users who are viewing this thread

Back