**** DONE: GB-56 1/72 P-47M - Thunderbolts and Lightnings

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

That could certainly affect things Greg, especially if the air was even a little damp.
Try the water thing mentioned above, and if that works, then a second coat will almost certainly dissolve the "spots" and give a better finish, but move the model into a warmer, drier room.
 
Hi Folks,

After much pondering I have repainted the Jug. I merely put on a fresh coat over the spoilt one, and then redid the gloss coat, in a warmer room. I guess the low temperature in my hobby space caused the problem in the first place.

Decals are on and a Matt coat applied to seal them in.

Thanks for looking, cheers Greg 👍

IMG_20221216_142619.jpg


IMG_20221216_142608.jpg
 
Many thanks for all your comments 🙂

I'm calling this one done! Not my best I'm afraid but far from my worst 😂

A couple of mid afternoon outdoor photos with the sunlight fading. I'll get some better ones over the next few days for the finished thread.

IMG_20221231_165025.jpg


IMG_20221231_165049.jpg


Cheers, and Happy New Year to all 🥳
 

Users who are viewing this thread

Back