**** DONE: GB-56 1/48 P-38G - Thunderbolts and Lightnings (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Used this red permanent marker to draw the lips on the teeth. This photo also shows the material that I use to make the masks from. It is Oracal adhesive backed vinyl and I either trace or draw images and cut them out on my Silhouette Cameo 4 cutter.
 

Attachments

  • 20221228_205025.jpg
    20221228_205025.jpg
    770.7 KB · Views: 11
Spent the last few days putting on tiny stencil decals mostly on the bottom. Since I scraped all of the olive drab paint off around the fuel filler caps I punched out the center of those decals and just used the part on the cap.
 

Attachments

  • 20230112_211305.jpg
    20230112_211305.jpg
    559.6 KB · Views: 11
  • 20230112_211214.jpg
    20230112_211214.jpg
    458.1 KB · Views: 11
Dull coat is dry, started peeling of the masks on the clear parts...
 

Attachments

  • 20230116_201225.jpg
    20230116_201225.jpg
    499.9 KB · Views: 8
  • 20230116_201248.jpg
    20230116_201248.jpg
    401 KB · Views: 7
  • 20230116_201239.jpg
    20230116_201239.jpg
    422.3 KB · Views: 8
  • 20230116_201915.jpg
    20230116_201915.jpg
    401.5 KB · Views: 8
Time for my tempra paint wash. I use the cheap tempra paints from the dollar store, black and red oxide mixed with water and a drop of dishwasher soap are painted over the surface and when dry wiped off with a damp paper towel. Here's the before and after photos.
 

Attachments

  • 20230117_213111.jpg
    20230117_213111.jpg
    851.7 KB · Views: 11
  • 20230117_220122.jpg
    20230117_220122.jpg
    591.1 KB · Views: 10
That's a smart process, I like it. :D
Well not that smart, I should have waited to remove the masks for the clear parts as it needs another dull coat to seal the tempra paint, or it will stick to the fingers when moving the model.
 
Got my turbo superchargers installed tonight. You can see where I hollowed out the kit cover as shown in an earlier post.
 

Attachments

  • 20230119_212417.jpg
    20230119_212417.jpg
    483.9 KB · Views: 9

Users who are viewing this thread

Back