**** DONE: GB-56 1/48 P-38G - Thunderbolts and Lightnings (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Davecww1

Airman 1st Class
229
441
Jan 31, 2021
User name: Davecww1
First name: Dave
Category: Advanced
Manufacturer: Tamiya
Model: Lockheed P-38 F/G Lightning
Scale: 1/48
Add ons: Quinta cockpit detail, Ultracast seat, 3d printed wheels from Tomasz Gronczewski, and perhaps the Eduard Brassin gun bay set.

I 'm looking to do aircraft flown by Capt Tom Lynch. I have a sheet from Superscale for his -H but it needs a few corrections or additions.
Dave
 

Attachments

  • 20221105_195643.jpg
    20221105_195643.jpg
    681.9 KB · Views: 35
  • 20221105_195814.jpg
    20221105_195814.jpg
    1.2 MB · Views: 35
  • 20221105_195935.jpg
    20221105_195935.jpg
    1.2 MB · Views: 35
Last edited:
Nice. But please add the required info to the post above, You may check on other GB threads what there should be.

:thumbright:
 
Lt. Col. Thomas J. Lynch
39th Fighter Squadron, 35th Fighter Group, 5th Fighter Command
Ace Pilot credited with 20 Victories
Background
Thomas J. Lynch was born December 9, 1916 in Catasauqua, Pennsylvania. Nicknamed "Tommy". During 1940, he enlisted in the U.S. Army Air Corps (USAAC) as an aviation cadet and completed flight training and earned his wings then was commissioned as a 2nd Lieutenant with serial number O-388066.

Wartime History
During 1942 as a 1st Lieutenant sent overseas to the South West Pacific Area (SWPA). Assigned to 5th Air Force (5th AF), 35th Fighter Group (35th FG), 39th Fighter Squadron (39th FS) flying the P-39 Airacobra and P-400 Airacobra defending the Port Moresby area.


p39-lynch-1941.jpg
On May 20, 1942 took off piloting an Airacobra over Port Moresby and claimed his first two aerial victories over Waigani. On May 26, 1942 took off from Port Moresby to intercept Japanese planes and claimed his third aerial victory over Mount Lawes. On June 16, 1942 took off piloting P-39 Airacobra and was bounced by a pair of A6M2 Zeros from the Tainan Kōkūtai (Tainan Air Group). Although he managed to escape, another four Zero intercepted damaging his plane. Unable to return to base, he bailed out and broke his arm, but returned to duty.

Afterwards, the 39th FS converted to P-38 Lightnings.
P-38G-1-LO Lightning Serial Number 42-12715
Built by Lockheed Aircraft Corporation (LAC) in Burbank. Constructors Number 222-7149. At the factory painted with olive drab upper surfaces and gray lower surfaces. Delivered to the U.S. Army Air Force (USAAF) as P-38G-1-LO Lightning serial number 42-12715. Disassembled and shipped overseas to Australia and reassembled.

Wartime History
Assigned to the 5th Air Force (5th AF), 35th Fighter Group (35th FG), 39th Fighter Squadron (39th FS). No known nickname or nose art. Both engine cowlings were painted with shark mouth markings. This aircraft operated from 14 Mile Drome (Schwimmer) near Port Moresby. This P-38 was flown by several pilots including 1st Lt. Thomas J. Lynch, Fred Shifflett and Walters. On the side of the nose was a scoreboard with ten Japanese flags indicating victory claims by pilots.

Following info from Pacific Wrecks.com.
On December 31, 1942 this aircraft was flown by 1st Lt. Thomas J. Lynch, along with twelve other P-38s escorting A-20 Havocs, B-25 Mitchells and B-26 Mauraders on a bombing mission against Lae Airfield. Lynch made several passes at Oscars and Zeros, shooting one down that crashed into the water.

On January 20, 1943 at 14 Mile Drome a U.S. Army Signal Corps photographer took pictures of 39th Fighter Squadron (39th FS) fighter pilots standing near the right engine including 2nd Lt. Carl G. Planck, Jr., 2nd Lt. Norman D. Hyland and 2nd Lt. Kenneth C. Sparks.
 
Here are a couple of images of Tommy Lynch's 42-12715 from a build that Steph did a few years ago. Unfortunately I haven't found any photos with the white 19, only photos that I have found are white 10 which was a -H model.
 

Attachments

  • Lynch T. J.-P38G 42-12715 , mars 1943.jpg
    Lynch T. J.-P38G 42-12715 , mars 1943.jpg
    21.5 KB · Views: 27
  • Lynch T. J.-P38G 42-12715, mars 1943_1.jpg
    Lynch T. J.-P38G 42-12715, mars 1943_1.jpg
    29.3 KB · Views: 29
Nice choice Dave :)
As you know, it exists a photo of "white 19" but taken from the right side so impossible to say with certitude that is 42-12715.

The only thing we "know" (read in some books but I don't remenber which) it's that "White 10" was the 39th FS O.C.'s mount and it was the case for Lynch but from late in March 1943. The photo with "White 10" SN42-12859 was taken after his 10th victory on 8 May. So before this date, he flew with other "numbers". The info regarding "white 19" flown from late December 1942 to early March 1943 is from an extract from a book sent by email by a person on Hyperscale forum there is several years ago. I also found this information on the web where the website condensed all aircrafts flown by PTO Aces... But I can't find this website in my favorites or the website doesn't exist anymore.
:)
 
Step 1, in order to use the Eduard Brassin gun bay requires you to saw apart several of the nice kit parts. And with the resin in the nose instead of the ball bearing I will need to add more weight to the front of the booms. The toughest part is getting the nose wheel walls correct in the front, I had to sand a couple of mm off of the front wingspan piece to get the resin gun bay to sit low enough in the nose.
 

Attachments

  • 20221106_135454.jpg
    20221106_135454.jpg
    98.2 KB · Views: 24
  • 20221106_135316.jpg
    20221106_135316.jpg
    208.6 KB · Views: 24
  • 20221106_135149.jpg
    20221106_135149.jpg
    320.1 KB · Views: 23
I think I will change my mind and go ahead with this one instead. P-38 G-5 42-12859. A good photo for reference was found in Lightning Strikes by Steve Blake, and looking at the photo, the forward spinner was painted a color, most likely the blue used on 39th FS aircraft.
 

Attachments

  • 20221106_142256.jpg
    20221106_142256.jpg
    843.8 KB · Views: 22
Next part, prep the panels for the Quinta parts, this involves taking a sanding stick to the raised surface detail, making everything flat to allow the quinta panels to adhere properly.
 

Attachments

  • 20221106_150532.jpg
    20221106_150532.jpg
    152.1 KB · Views: 20
Sprayed the interior bits, for the early P-38's I made a mix of 50/50 Model Master Interior green and Testors Zinc chromate yellow.
 

Attachments

  • 20221106_170057.jpg
    20221106_170057.jpg
    496.9 KB · Views: 19
Did most of the Quinta details. They are 3d printed vinyl instruments and panels with decal adhesive on the back. First I painted all of the areas for the decals Tamiya semi-gloss black. Then I applied the Quinta panels like normal decals, after dipping them in water I brushed Elmer's glue where they went and stuck them in position. When dry there were a couple of issues, the curved areas on top of the throttle box wouldn't stay curved around the plastic. I ended up using a touch of super glue on the bottom edge and pressed them down on the curved part until it dried. That locked them in the correct place. The other issue was that a white backing layer showed up around the edges of the black panels. A fine brush and thin black paint took care of that after
20221107_205316.jpg
everything dried overnight. Here are some close ups. Bad lighting but you can see the details.


20221107_205305.jpg
 

Users who are viewing this thread

Back