GB-63 1/48 F-82 Twin Mustang 449th Sq Alaska – One Trick Pony

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

The big file
icon_lol.gif
Keep at er Glenn
 
The big file View attachment 804362 Keep at er Glenn
And here it is, and does it make the plastic dust fly!

20241105_201122.jpg


On to the cockpit
Here is a before and after cleanup of one of the seats showing just how rough these parts are
20241105_201142.jpg
20241105_201923.jpg


The right side cockpit walls. Some molded in detail and 3 added boxes. The left side (not pictured) only had the molded in detail.
20241105_211544.jpg


The rest of the cockpit parts except the stick, and the panel which looks pretty good
20241105_211644.jpg


I will be adding some bits of wire here and there and it should be good enough for closed canopies. I have a lot more work on the fuselage halves before I can get the pits installed
 
And here it is, and does it make the plastic dust fly!

View attachment 804484

On to the cockpit
Here is a before and after cleanup of one of the seats showing just how rough these parts are
View attachment 804485View attachment 804486

The right side cockpit walls. Some molded in detail and 3 added boxes. The left side (not pictured) only had the molded in detail.
View attachment 804487

The rest of the cockpit parts except the stick, and the panel which looks pretty good
View attachment 804488

I will be adding some bits of wire here and there and it should be good enough for closed canopies. I have a lot more work on the fuselage halves before I can get the pits installed
I see you got your wood rasp out for this one
 
Antenna yes. Not sure, but possibly part of the radio altimeter, along with the dome that looks like a beacon, but is actually part of the same equipment, similar to that seen on the T-28 Trojan / Fennec, and F-86 Sabre.
 
Quite a lot done in the last couple of days getting the cockpit innards painted. I added a wiring bundle to the right side panel, seat harnesses made from wine bottle foil and oxygen hoses made from lead wire wrapped with fine wire.

1000009165.jpg
1000009166.jpg

1000009167.jpg
1000009168.jpg
1000009169.jpg
1000009170.jpg
 

Users who are viewing this thread

Back