HK 1/32 B25J "Meet Mirs Runyon" (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

javlin

2nd Lieutenant
5,948
1,420
Nov 20, 2007
MS
I have started what will be a very long build for me as planes go.The HK B25J is an impressive kit coming out of the box but I have gone as far to get three of the PE kits available from Eduard those being nose/bombardier,Copit and the fuselage.I have one new book thus far with another expected in days for interior pics.The exterior will be the OD upper surfaces with what appears to be NM lower surface.I am thinking of getting the the gun barrels from here as a kit from 32080 B-25 gun barrels set modification A - profimodeller.com but if Wojtek can help me on the price :dontknow: I also am now getting use to working my new PE bending tool some it helps for those longer straight bends but some flat unserrated pliers still help.
 

Attachments

  • DSC03346 (900 x 675).jpg
    DSC03346 (900 x 675).jpg
    67.8 KB · Views: 257
  • DSC03349 (900 x 675).jpg
    DSC03349 (900 x 675).jpg
    57.3 KB · Views: 251
  • DSC03350 (900 x 675).jpg
    DSC03350 (900 x 675).jpg
    69.1 KB · Views: 256
  • DSC03352 (900 x 675).jpg
    DSC03352 (900 x 675).jpg
    63.8 KB · Views: 239
  • DSC03353 (900 x 675).jpg
    DSC03353 (900 x 675).jpg
    61.4 KB · Views: 248
  • velky_1333500997.jpg
    velky_1333500997.jpg
    44.6 KB · Views: 276
  • MMR.jpg
    MMR.jpg
    76.7 KB · Views: 285
Last edited:
wow !! It is a very interesting project Javlin. :shock:
And you started on the right foot ...:thumbright:

Like Jeff, I go for the snack and over soda !!

Saludos amigo,

SANCER
 
Not allot to report other projects(wood0 taking up much of my time.The nose has had a coat of paint using this fellas technique somewhat Technique: Black Basing | Doogs' Models and I kinda like it.
 

Attachments

  • DSC03363 (900 x 675).jpg
    DSC03363 (900 x 675).jpg
    87 KB · Views: 223
  • DSC03364 (900 x 675).jpg
    DSC03364 (900 x 675).jpg
    89.3 KB · Views: 244
  • DSC03365 (900 x 675).jpg
    DSC03365 (900 x 675).jpg
    90.5 KB · Views: 228
  • DSC03366 (900 x 675).jpg
    DSC03366 (900 x 675).jpg
    81.8 KB · Views: 223
Great project Kevin. Will watch with interest. I like the black basing technique and will need to give that a try.

I am using a black primer offered by Alcad.I sprayed inside the panels first and dusted it in 2-3 passes did the same on the boxes.I am still going to hit with a wash but do not think as much will be needed for effect.
 
Thanks Gerry not much of late :( But I been doing a lot of wood work.I am building a 72" X 40" computer station ATTM,a small table next 42" X 36" (soft maple) and then two end tables (aromatic cedar) sisters one taller for a vase to be finished and delivered by late March early April...I think it's needless to say progress is going to be slow.I am plum tired after 10-11 hours at the regular job and then another 2-4 in the shop a few nights a week with the office unoccupied (model room).I use to hate sanding by hand but now I find it very relaxing :dontknow:
 
Well I have not been around much fella's been quite busy with alot of other projects but seeing I am on leave with pay till a doctor(s) give me the go ahead to go back to work thought I do something for me.This what you see is about 15hrs over the last few days I still have to do the bomb sight along with the MG holder for the center of the nose.The decals on the ammo cans come off some stock from AirScale something kinda close.
 

Attachments

  • DSC03388 (900 x 675).jpg
    DSC03388 (900 x 675).jpg
    60.3 KB · Views: 208
  • DSC03389 (900 x 675).jpg
    DSC03389 (900 x 675).jpg
    70.2 KB · Views: 220
  • DSC03390 (900 x 675).jpg
    DSC03390 (900 x 675).jpg
    78.6 KB · Views: 230
  • DSC03391 (900 x 675).jpg
    DSC03391 (900 x 675).jpg
    71.1 KB · Views: 216

Users who are viewing this thread

Back