Is there information around on how the display worked for this radar. From what I have seen it had one cathode tube. I am just q guessing here but was there a switch to display say azimuth and another to show range and elevation, similar to the FuG 220s two tubes but the neptunce used a single and combined them? I am really speculating since I have found little.
Neptune FuG 218
- Thread starter tkaniuka
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
ThomasP
Chief Master Sergeant
This FuG 217 manual might help explain (the 217 and 218 were closely related) but it is in German. My understanding is that the 218 used the same type of scope and information display method as the 217,
- Thread starter
- #4
The 218 was in a lot of ways different from the 217. The 218 had the posibility to switch between 6 frequencies in flight by the operator. The display was driven with a a motor switch in the so called A/N way. A modeof electrically switch the direction of the radar beam from side to side or up and down, giving two imigies on the CRT.
The single tube crt was switched by the operator to show the horisontal view or the vertical. The picture was looking like the FuG 220, only the 220 showed both horisontal and vertical at the same time, the 218 was switched by the operator.
The single tube crt was switched by the operator to show the horisontal view or the vertical. The picture was looking like the FuG 220, only the 220 showed both horisontal and vertical at the same time, the 218 was switched by the operator.
Snautzer01
Honourably banned
- 45,926
- Mar 26, 2007
Did you find this: eBay: Radar systems: Würzburg, Allied etc.
Snautzer01
Honourably banned
- 45,926
- Mar 26, 2007
Ohhh and do tell. You have my ear.
