Thanks :thumbright::thumbright:
Painting almost ready. Now missing the spots.
Here a problem but I was already waiting. The mask, despite having waited more than 5 days, marked the stripe painting. I think the problem is the gloss paints. They are more affected than matt...
Thanks for following.
With another action from Photobucket and after much searching I finally got where to host my images. Easy, faster to make the hosting of the images but, more time consuming to transfer images to the forums (Postimage). Now the problem will be to replace all the images you...
Thanks for your comments :thumbright:.
Robert.
Since I remember in modeling I have always used Tamiya's paints. To paint most of the models, especially Germans, I used mixtures indicated by Tamiya or found on the net. My problem came up with RLM 80, 81, 82 ... I could not find mixtures that...
Thanks Wurger.
The interior and wells landing gear I used Tamiya paints XF-63 and XF-22.
For the painting of the camouflage I will use the paints of the Gunze RLM 76, 75 and 74. The yellow is the RLM 04 of Gunze and the stripe I used a mixture also with paints of the Gunze.
Regards
ajcmac
Thank you all for the comments :thumbleft:.
And with the arrival of paints that were missing more advances.
O RLM 04.
Painted stripe.
Now put on the mask to start painting the fuselage and wings.
Regards
ajcmac
Thank you for your comments :thumbright:.
I glued the fuselage and the wings and corrected the fitting of seat belts.
Now mask and start painting.
I applied mate clear on the propeller.
Regards
ajcmac
And after some paint problems solved the model is finished. It was an assembly that gave me a special taste especially for bringing me back to modeling. Let's see if I continue.
The cockpit/engine.
The model finished.
And the missing image.Glued canopy and engine without...
Thanks :salute:.
One more step.
I painted the propeller and the spinner. Just missing the mate clear, it's over, I'm waiting for a new bottle to arrive.
Air inlet to the front radiator.
Regards
ajcmac
Thanks :thumbleft:.
And after the RLM 02 I applied lights and shadows, a wash and a dry brush. I will then apply the mate clear to remove any glare resulting from the application of the dry brush.
Now the cockpit.
Best regards
ajcmac