1/48 Tamiya F-110A Spectre

[BertUS]

Nice pit, but some subtiele wahes would be perfection

 

[Gnomey]

Good work so far!

 

[F-104nut]

Finally back to working on the F-110A . Last time i worked on this a few year ago i got the decals on then last night i got the decals seal with gloss coat. Got the Eduard Brassin struts in the mail and cleaned up and test fitted . Horizontal stabilzer and center hot section painted with tamiya LPpaints and mix per instruction . Model been sanded down with 3000 grit tamiya sanding sponge Nose and windshield was painted with Tamiya LP-3 . Next to start sprying primer .

IMG_2219 by b007scott, on Flickr

IMG_2220 by b007scott, on Flickr

IMG_2252 by b007scott, on Flickr

IMG_2253 by b007scott, on Flickr

IMG_2221 by b007scott, on Flickr

IMG_2250 by b007scott, on Flickr

IMG_2251 by b007scott, on Flickr

Brian

 

[Viking1066]

 

[Vic Balshaw]

All looks great.

 

[Wurger]

 

[Gnomey]

Nice work so far!

 

[F-104nut]

Brass landing gear was given a 30 bath in vineager . Oleo scissors glued on with supper glue . Next to get some primer on them. Model was primed with the David Hasen technique parts Mr Base White and Mr color Zinc Green . Now to polis the primer with fine sanding sponge and then start painted the Tamiya LP white .

IMG_2270 by b007scott, on Flickr

71347063621__BF2F2720-C5D7-4346-9483-84A8D36B5FCA by b007scott, on Flickr

71347052063__5373E028-CDF0-43EC-8BDA-BFE1C61E0619 by b007scott, on Flickr

71347051009__DE8560E8-35CF-452D-8DA5-6BC565450777 by b007scott, on Flickr

IMG_2275 by b007scott, on Flickr

71349725207__7F2F025E-7CFD-4492-89FE-DE16FF5CE790 by b007scott, on Flickr

IMG_2295 by b007scott, on Flickr

IMG_2296 by b007scott, on Flickr

Brian

 

[Wurger]

 

[Gnomey]

Looks good so far!