Airbrush hoods or spray booth

[pinehilljoe]

We recently moved from MD to Northern VA, and am back to setting up my modeling work bench. In the last house I went very low tech for airbrush hoods. I set a large open carb board box on a work bench, and sprayed the pieces in the box as a low tech spray booth. This more or less contained the overspray and mist. My new work area for building is in the finished area of the basement, and looking at where to set up a spray booth. Anyone willing to share their set up?

 

[fubar57]

This what I use. I got it from the papermill I worked in that shut down in 2008. Its original use was drying pulp samples. Dimensions are 29"l x 16"w x 19"h made from ½" plywood. 1:48 T-6 for scale

 

[Crimea_River]

I inherited a home made booth from a friend who moved house recently. Not at home to take pics at the moment but I can make the following observations:

Lights - you need lots of good lighting and it should placed to shine directly on the work and shaded from the eyes.

Ventilation - I have found the small exhaust fan to be insufficient for the job, or maybe it's the shape of the box. I've run the duct to my shop dust collector system and turn that fan on to do full extraction.

Hood shape - small enough to allow proper fume control but large enough to access the work. Avoid difficult to clean corners as the paint can dust and adhere to the hood surfaces to get blown onto your model later.

 

[pinehilljoe]

This what I use. I got it from the papermill I worked in that shut down in 2008. Its original use was drying pulp samples. Dimensions are 29"l x 16"w x 19"h made from ½" plywood. 1:48 T-6 for scale

View attachment 794010

View attachment 794011​

does the exhaust go outside?

 

[fubar57]

Not mine. I only use acrylics so I'm more worried about the over-spray and use a spare pillow case (brown) to catch this. If the wife ever looks in, I am not using a spare pillow case

 

[pinehilljoe]

I moved up from the Mk I cardboard box spray booth to a booth off Amazon. I'm still getting my work space set up since we moved to the new house. I have a corner in the unfinished part of the basement. I ran power to the space from the basement subpanel. Set up is a desk no one wanted and for the painting, a corner desk we don't use. Under build is Monogram's Typhoon. The airbrush and pump have been used in months. I'm finally able to find time to start a new model. I'm thinking of attaching two studs to the wall with Ramset's and mounting peg board.

 

[fubar57]

Great looking set-up but way too tidy

 

[special ed]

Always allow that you will "need more space".

 

[pinehilljoe]

Great looking set-up but way too tidy

I've had the tackle box since high school to hold model tools. Class of '80