F4F-3 vs F4F-3A; which crankcase to use on a 1:72 scale, Arma Hobby "Wildcat"? (2 Viewers)

FJS3

Recruit
4
1
Joined
Nov 17, 2026
Location
Palm Beach Gardens
I'm sorry if I am repeating a topic that has been discussed in the past, but I am having an issue finding definitive evidence backing up what I believe to be so.

The F4F-3 series, used three different engines. The early -3 used the R-1380-76. The latter -3, the R-1380-86. the -3A, used the R-1380-90. I think that I remember seeing pictures of, and reading, that the ignition magnetos were mounted to the rear of the cylinders on the -90 engine, which would require the gear box to not have the magnetos mounted to it. On most "Wildcats" have those are mounted to the gearbox in front of the two top cylinders and they are very prominent.

I want to build an F4F-3A. Arma Hobby, to their credit, provides you both styles of gearboxes, with and without the mags, as well as all the cowl parts to accommodate all the various cowling layouts used on the -3 "Wildcat".

The question of which cowl to use, I have figured out, and I have all the Buer Numbers as to which aircraft was either an early or late -3, as well as the -3A. I just don't want to goof up the gear boxes and I am looking for guidance. Of course I could be wrong and all the -3 variants had the mags placed forward on the gearbox.

As a side note, these little "Wildcat" models are fantastic and if you are into building 1/72 scale aircraft, these are the best in the scale...in my humble opinion that is... ;) The one pictured is an F4F-4.

Thanks in advance for any information that can point me in the right direction.

Regards,
Freddie from PBG
 

Attachments

  • IMG_0554.jpeg
    IMG_0554.jpeg
    397.8 KB · Views: 0

Users who are viewing this thread

  • Back