Mk-44 Depth charge

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

cvairwerks

Staff Sergeant
1,176
1,665
Mar 20, 2020
North Texas
Anyone have or run across any photos or manuals for the Mk-44? I was reading the after action report from my uncle's sinking of a U-boat and would like to find more on the dc's they used.
 
1779733721096.png
 
I've seen both of those references. I would like to see more info on the fuzing problems and their timing, as the after action report states that they were releasing the dc's at under 100' above the water and at about 180 knots airspeed.
 
They used hydrostatic (Water Pressure) fuzing. For aircraft depth charges, the initiation depth was set to 35 feet.
For most of the war, submarines were detected by aircraft while they were surfaced. The aircraft was usually detected when it was about 60 seconds out. If the submarine was rigged for a Crash Dive, the time from initiating the dive to the conning tower submerging was 30-40 seconds. After another 30 seconds, the submarine would be too deep to be damaged by the depth charge (Lethal radius about 25') release interval in an attack was about 60 feet between releases. The bomb would sink for about 2-3 seconds before the fuze initiated.
If the submarine hull or conning tower were above the surface at release time, the aimpoint for the middle of the stick was the conning tower or somewhat forward. If the sub was submerged for less than 30 seconds, lead was estimated from the location of the "swirl" left by the submerging sub, and an assumed speed of the target of about 5 kts.
Drop altitudes were generally below 100'.
 

Users who are viewing this thread

Back