I have to remove a pair of Hydromatic Hamilton Standard props from the R2800 engines. I am trying to find what specific tools are needed to remove the props. I have found a list online of all the tools needed for taking the props off and apart. I need to know what tool or tools are needed once the dome is off? Any assistance is greatly appreciated as I want to be able to show up with everything needed on hand to do the job. Thank you.
Pratt & Whitney R-2800/ Hamilton Standard Hydromatic Prop Removal Help Needed (5 Viewers)
- Thread starter AABEECK
- Start date
MiTasol
Major
Welcome to the forum. A little about your self and the aircraft you are working on would be welcomed by most members.
If you go to the thread Manual Index - American any Erection and Maintenance manual for any aircraft that has Hydromatic props will give you the details you need. Note there is a locking screw that must be removed before you can undo the dome retaining ring.
Today I am getting an error message for every link from the above web page. Had that problem not existed I would have given you a specific link.
If you go to the thread Manual Index - American any Erection and Maintenance manual for any aircraft that has Hydromatic props will give you the details you need. Note there is a locking screw that must be removed before you can undo the dome retaining ring.
Today I am getting an error message for every link from the above web page. Had that problem not existed I would have given you a specific link.
Last edited:
