Maximum safe dive limits: (as far as I know)
A6M2 Mod 11-21: 630km/h IAS
A6M3 Mod 22: 630km/h IAS
A6M3 Mod 32 (Hamp): 670km/h IAS
A6M5 Mod 52: 670km/h IAS
A6M5 Mod 52 Ko/Otsu/Hei: 740km/h IAS
A6M7 Mod 63: 740km/h IAS
A7M1 / A7M2: ???km/h IAS
The A6M3 Hamp had smaller clipper wing
The A6M5 had re-designed smaller wing giving it better roll rate at higher speeds (but worse at low speeds) due to smaller wing span reducing the loading slightly but due to smaller wing and less lift it was worse in rolling at low speeds compared to the big wing Zeroes.
The later versions of A6M5, starting with the Ko had re-inforced wings which increased their maximum dive limit from 670km/h to 740km/h from baseline A6M5… or… 630km/h —> 740km/h compared to the full wing Zeros.
Grok 3 estimates that late A6M5 with 740km/h maximum dive limit delays the control stiffening forces by 130-190km/h compared to the full wing Zeroes. Considering its AI… I wonder if how true this is and wether there are sources to back it up.
Then there's the A7M Reppu series…
A6M2 Mod 11-21: 630km/h IAS
A6M3 Mod 22: 630km/h IAS
A6M3 Mod 32 (Hamp): 670km/h IAS
A6M5 Mod 52: 670km/h IAS
A6M5 Mod 52 Ko/Otsu/Hei: 740km/h IAS
A6M7 Mod 63: 740km/h IAS
A7M1 / A7M2: ???km/h IAS
The A6M3 Hamp had smaller clipper wing
The A6M5 had re-designed smaller wing giving it better roll rate at higher speeds (but worse at low speeds) due to smaller wing span reducing the loading slightly but due to smaller wing and less lift it was worse in rolling at low speeds compared to the big wing Zeroes.
The later versions of A6M5, starting with the Ko had re-inforced wings which increased their maximum dive limit from 670km/h to 740km/h from baseline A6M5… or… 630km/h —> 740km/h compared to the full wing Zeros.
Grok 3 estimates that late A6M5 with 740km/h maximum dive limit delays the control stiffening forces by 130-190km/h compared to the full wing Zeroes. Considering its AI… I wonder if how true this is and wether there are sources to back it up.
Then there's the A7M Reppu series…