aluminium container

[robert.copley1]

dont know if I have the correct forum , anyone know anything about this container , it a very well made with a WD Id

 

[MiTasol]

You will need enough photos for people to know what the whole thing looks like. Especially look for any numbers stamped into the metal and any inspection stamps - often round or oval but can be other shapes - these are usually 6-10mm (1/4 to 3/8) high. If you find one that is an H and a T in a circle/oval/etc that just means the stamped part was heat treated.

 

[robert.copley1]

You will need enough photos for people to know what the whole thing looks like. Especially look for any numbers stamped into the metal and any inspection stamps - often round or oval but can be other shapes - these are usually 6-10mm (1/4 to 3/8) high. If you find one that is an H and a T in a circle/oval/etc that just means the stamped part was heat treated.

thanks have this picture

 

[MiTasol]

more than one angle and dimensions and any other information - looks like a good metal suitcase from the 50's in that photo

 

[robert.copley1]

some more pics ,