BF110 with BMW radial engines

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

RAGMAN

Airman
78
0
Jul 5, 2005
vancouver ,B.C.
Ah, I finally got a computer,my last one crashed and burned.I was wondering how the BF110 would have performed if it used the BMW radial engines that the FW190 used?I always thought the speed would have been better.What do you guys think?Thanks.
 
A radial engine give more drag than a inline engine but it will still give more speed, but in other hand it also gonna give more power so it will climb and accelerate faster than the inline engine. but the negativa thing is that if you putting bigger engine in that plane you gonna get negativa effect like heavier plane that will reduce the plane's agility and range for example.
 
Still be a turkey against a single engined bird. Faster, but not enough to save itself. Somebody else made a good point about the airframe not being strong enough. Probably true.
 
Heinz said:
Speed would have increased for sure. Fitting the engines is another I doubt the stock wings would have been strong enough for the heavy engine.
Click to expand...

I'm also guessing the CG would've been off . . . having two radial engines out on the front end of the nacelles would've upset the aircraft's center of gravity . . . the CG of the in-lines would've been two or three feet further to the rear. I imagine there would've been some severe nose-down tendencies for the aircraft . . .
 
I wonder why the luftwaffe didn't make a twin radial engined fighter?I read that the bmw engine was more readily available than the DB engines? Mind you the plane would still be a unmanueverable compared to a single engine fighter though,maybe even a pig on gas too.
 
My understanding is they didn't think much of radial engines in a high speed situation. Though inlines did that kind of work. Radials were used for bombers. Tank convinced them with the 190 that it could be done. By that time...
 
This is a minor point but a radial engine is inherently lighter than an inline one and more compact so it would probably not have stuck out as far in front of the leading edge of the wings and the CG would probably not have been a problem.
 
But then it was going to be replaced by the Me210 or 410. Before that point the BMW was quite new to service in the 190.
 
I believe that in engines of the same displacement the radial would always be lighter. If you recall the reason why rotary engines which are the predecessors of radials, were so popular in ww1 was that they were extremely light and compact.
 
But then most of the decent allies radial engines were between 35 and 50 litres. Whereas say the Merlin was only 27.5 litres with a decent output.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

BF-100 with radial engines (like BMW 801)?
Replies
5
Views
1K
Admiral Beez
A
Radial engines favored for powering the tanks & AFVs, 1935-45
Replies
14
Views
307
bf109xxl
Questions Bugging Me on Jet Engines
Replies
11
Views
1K
Engineman
E
Multi-gun day and night Fighter Aircraft with two Napier Sabre (two-stage supercharger) engines
Replies
4
Views
360
Steve Hnz
S
He 111 prototype test bed with Daimler-Benz 601 engines?
Replies
9
Views
1K
Denniss
D
Menu
Log in
Register