captain Frey
Airman 1st Class
- 140
- Feb 18, 2012
Hello,
here is my latest assembly, an OV 10A Bronco from ICM 1/48 scale.
A very good kit, very well designed, top decals.
I used 3D decals from Eduard, a pitot from Master and turboprop outlets from Quickboost. Gunze paint and MRP (for the
white).I did not follow the order in the instructions, the main gears were only glued at the end which makes painting easier. Likewise the front gear was only finished at the very end.I placed 5 grams of lead distributed in the nose on each side of the consoles and 5 grams at the front of each beam at the level of the turboprops.
A tip, only glue the E20 parts (step 61) once the beams are glued to the wing, this can avoid puttying.
There is a bit of personal work in the cockpit.
Well, the photos aren't great but I don't know how to do better....
Best regards from France
here is my latest assembly, an OV 10A Bronco from ICM 1/48 scale.
A very good kit, very well designed, top decals.
I used 3D decals from Eduard, a pitot from Master and turboprop outlets from Quickboost. Gunze paint and MRP (for the
white).I did not follow the order in the instructions, the main gears were only glued at the end which makes painting easier. Likewise the front gear was only finished at the very end.I placed 5 grams of lead distributed in the nose on each side of the consoles and 5 grams at the front of each beam at the level of the turboprops.
A tip, only glue the E20 parts (step 61) once the beams are glued to the wing, this can avoid puttying.
There is a bit of personal work in the cockpit.
Well, the photos aren't great but I don't know how to do better....
Best regards from France
