P-51 screw question (2 Viewers)

greatgonzo

Airman
31
19
Joined
Aug 25, 2011
Can somebody tell what are the cross marks on the blades, and why are they only on some propellers?
Also am I right that small projections at the base of the cuffs are indicators of deicing installation? They don't seem to be very common too.
1.jpg
 
In the Engineering print, the orange "+" sign is said to be a gun camera boresight mark. But it was applied on the inner side of the prop blade. The yellow or white cross at the front seems to be a kind of a balance control sign IMHO.

cbrs.jpg
 
How does that work since the cross is on the front of the blade away from the camera?
 
The cuffs mounted at the base of the blades serve two functions:

1. Anti-ice

2. To streamline the base of the blade to make it more aerodynamic. At the base it is basically a cylinder and this not very streamlined. the cuff improves that. And on the B-29 and other radial engined aircraft I think it helped to fan more air into the engine.

Postwar, the blade cuffs were found to allow water entrapment between the cuff and the blade and promote corrosion, and they were often removed.

The F-51's that were overhauled and sent to Korea after the North Korean invasion received new Aeroproducts props that did not have the cuffs installed. So the old Monogram 1/32 F-51D kit does not have cuffs. The relatively few F-51's in the area that were pressed into service after the attack may or may not have had cuffs.
F-51D8thFBGroupK-2Taegu2Jul1951.jpg
F-51DROKAF.jpg
 

Users who are viewing this thread

Back