Please confirm if this is Hamilton standard Prop

[itawad]

Hello Experts

I bought this nice prop And was told it is a Hamilton Standard prop. I found these letters and numbers at the base


DWG N 6533A-21S
CHG BB
AMS 4130
MFG N 655194
Shank 56151
CHG W

i highly appreciate if you can provide me with any information about this prop.

Thank you again
Imad

 

[FLYBOYJ]

6533A-21S bladed can go to a Hamilton Standard 22D30 prop

 

[Michael Hope]

That was commonly used on the Beech 18, in the above mentioned 22D30 propeller.

 

[itawad]

THank you Michael. Apprecaited

 

[itawad]

6533A-21S bladed can go to a Hamilton Standard 22D30 prop

Thank you FLYBOYL

 

[topcatpatt]

As previously mentioned, the Hamilton Standard 6533A-21S blades w the 22D-30 hub can be used on the Beech-18 ( Twinbeech ), DHC-2 ( De Havilland Beaver ), etc. It is also called the " Canadian Prop "

 

[SaparotRob]

What a beautiful airplane.

 

[Wurger]

 

[Michael Hope]

View attachment 665537
As previously mentioned, the Hamilton Standard 6533A-21S blades w the 22D-30 hub can be used on the Beech-18 ( Twinbeech ), DHC-2 ( De Havilland Beaver ), etc. It is also called the " Canadian Prop "

The DHC 2 used a 6533A-12 to 18 had a rounded tip, with a nominal diameter of 9 feet to 8 foot 6 inch, the Beech 18 was 8 foot 3 inch nominal with squared off blade tips. The -21S blades would be too short for a a standard certified aircraft and would have take off issues.