Sherman M4A1E8 76(W) HVSS in 1/35?

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Lucky13

Forum Mascot
49,304
27,467
Aug 21, 2006
In my castle....
IMG_20240204_202158.jpg


IMG_20240204_202251.jpg


IMG_20240204_203952.jpg


IMG_20240204_225852.jpg


IMG_20240204_225958.jpg


IMG_20240204_230048.jpg


IMG_20240204_230140.jpg


Source: Sherman M4A1E8 76 (W) HVSS "Block Buster 3rd" – American Medium Tank

IMG_20240204_230455.jpg


IMG_20240204_230818.jpg


IMG_20240204_231626.jpg
 
T1: Originally 57 calibers long gun,[6] reduced to 52 calibers after tests in effort to improve balance.
M1: 52 calibers long version of gun adopted for use.
M1A1: M1 with longer recoil surface to allow it to be mounted on trunions placed 12 inches further forward.
M1A1C: M1A1 threaded for muzzle brake.
M1A2: M1A1C with rifling twist changed from 1:40 calibers to 1:32 calibers.
A muzzle brake was tested in January 1944, authorized in February 1944 with production starting June 1944. Not all guns received them. The threads of those without a brake were covered by a protector visible in many pictures.

From 1943, at the instigation of the head of the Armored Force General Jacob Devers, US Ordnance worked on a towed anti-tank gun based on the barrel of the M1, known as "76 mm gun T2 on carriage T3". Later interest in the project declined and the program was officially cancelled in 1945.

With the tank in the first post:
This Sherman M4A1E8 is a late war version and was an improved design featuring the 76mm M1A1 gun (71 rounds) instead of the standard 75mm and as secondary weapons the .50cal (12.7mm) M2HB machine gun and two .30cal (7.62mm) M1919A4 machine guns. The M4A1E8 tank was powered by the Continental R974 C4 9cylinder 400-460hp engine.
One of the big improvements of the tank was the HVSS suspension, which was easier in tank maintenance and allowed wider tracks, hence the "W" designation.

IMG_20240204_232751.jpg


Source: M1A1, M1A1C, M1A2 Gun Page | The Sherman Tank Site

Would there be an external difference between the A1 and the A2 or was it just the rifling?

IMG_20240204_232930.jpg


IMG_20240204_232951.jpg


Source: M1A1, M1A1C, M1A2 Gun Page | The Sherman Tank Site
 
If you would like to make the replic of the Sherman seen in these pics you had to replace the whole suspension system. I has to be done for all of the above models.
 
If you would like to make the replic of the Sherman seen in these pics you had to replace the whole suspension system. I has to be done for all of the above models.

I was thinking the same my friend, suspension from this one, gun from that one, bits and bobs from a third one....🤨🤔😉😆😂
 
Tamiya being good quality at a good price, maybe at bit of hammering and chiselling with these two?
Need to check the turrets though....🤨🤔

IMG_20240204_230455.jpg


IMG_20240204_234446.jpg
 
IMHO the TAMIYA 35359 1:35 U.S. Medium Tank M4A3E8 Sherman "Easy Eight" Korean War is a better source for the suspension system including the tracks.
The M4A3E8 above seems to have the different ones while the one below has them like the Sherman in your pics.

additionally .. and looks like the kit has correct mudguards ...

35359.jpg
 
 

Users who are viewing this thread

Back