What plane do you wish had sawservice

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

I think you have to be an American with an appreciation for muscle cars to understand the reference to "Hemi-bolt."

See: http://auto.howstuffworks.com/hemi2.htm

While Chrysler introduced the "Hemi" as a production automobile engine in 1951, it may be that their engine built for the P-47H was a Hemi as well. It may further be that this early Hemi had bugs that contributed to the engine problems with the P-47H.
 
I'm pretty sure that the hemi design is standard now on pretty much all engines. Chrysler originally coined the term and have been getting a lot of proverbial mileage out of it for some time now.
 
...and the japanes Kikka has no improvements over the Me-262 except for reduced weight and therefore carrier operating abilities.
In many ways it was an unbalanced design, having straight wings and less powerful engines, reducing two of the most striking advantages the Me-262 originally had: Speed and critical Mach speed.
 
But they were trying to get things better, they never were going to give up as long as they could fight they would.

Thanks for the help on the He-162 that design really is interesting, the German jet and rocket program so much better then the USAAF, well we made up for it by collecting what German's we could ;)
 
The U.S jet programme wasn't bad, they had the J-33 jet engine that was based on British designs but was as twice as powerful. The British engineers saw that engine and decided that they could go one better, which they did with the Rolls Royce Nene.

From an aircraft point of view - need I say more than the P-80?
 
Interestingly, some of the first British jet-tests were conducted using the Avro Lancaster prototype, BT308;... and then in early 1943, a modified Lancaster II was used, with a Metro-Vickers Beryl F2/1 gas turbine fitted where the rear-turret was, with a big scoop on top... Also, a Lancaster Mk.VI, known as the ''Universal Test Bed'', was fitted with a 2,600 lbs.static-thrust Armstrong-Siddeley ASX jet turbine mounted around the bomb-bay....Finally, Lancastrian VH742 was fitted with the two RR Nenes, replacing the outboard Merlins, and made it's maiden flight on the 8th August 1946, the jets having 10,000 lbs of available s/t. - De Havilland also obtained a Lancastrian to test their new 'Ghost' engines, also of similar thrust to the Nenes......

I knew the Lancaster was an awesome design, I just discovered these additional facts having just finished Roy Chadwick, the designer's, biography, ''Architect of Wings'' [by Harald Penrose]...bloody good read!!
 

Attachments

  • raf_487__nz__sqn._-_on_the_hunt..._973.jpg
    raf_487__nz__sqn._-_on_the_hunt..._973.jpg
    16 KB · Views: 373
I'm pretty sure that the hemi design is standard now on pretty much all engines. Chrysler originally coined the term and have been getting a lot of proverbial mileage out of it for some time now.
Most engines use the typical wedge or pent-roof cylinder head design in open and closed chamber, including almost all OHV designs.
The Hemi V8 from Dodge is the 426 favoured by dragsters, Adler's Grand will be a 318 or 360 (383 or 440 possibly optional but I doubt it) and all have typical wedge cylinder heads.
I modelled a 440 for you on Engine Analyzer Pro set at 92 R+M/2 octane fuel and std dyno spec (factory rated at 375hp), swapped the heads for a Hemi design straight off a 426 and popped a 1050 dominator carbie on it for 466hp straight up.

I've even got the stats for a Spit MkV 30-litre Merlin in here...
 
with regards to the lancasters mentioned........

the top picture is of the sole Swiss lancaster, the Tp-80 (formerly RA805, a Mk.I of the RAF) was aquired by the swiss in 1950, and was delivered in may 1951. She was modified by Avro at Hamble in the UK. A large pod was fitted under the fuselage to contain the jet engine and the underside of the fuselage was covered with stainless steel plating to resist the heat from the exhaust. For the same reason, the tailwheel was made retractable. A large control panel was installed in the radio operater's space

she was used to test numerous sweedish engines

unfortunatly she crashed in 1956, taking two of the 4 man crew with her.........
 

Attachments

  • mk.ii_ll735_164.jpg
    mk.ii_ll735_164.jpg
    68 KB · Views: 370
  • picture_5_823.jpg
    picture_5_823.jpg
    31.6 KB · Views: 382
  • tp-80_481.jpg
    tp-80_481.jpg
    37.3 KB · Views: 376
If we are talking about never saw service types, put me down for a Merlin II or Merlin 45 powered Westland Whirlwind variant.

Get rid of the unreliable and somewhat anemic Pegasus engine. You would have to space the Merlins further apart as they needed a larger prop than the Pegasus.

Go to a belt feed for the Hispanos to double the amo load, add Fowler or butterfly- type trailing edge flaps to reduce the landing distance and clip the wingtips for a better rate of roll (which you would need as the Merlins are now further out from the Centre of gravity).

Strap on two 90 litre drop tanks or do like Westland wanted and install a 45 gallon rear fusealge tank and install a semirecessed centre-line bomb mount and you would have one very mean mother of a low alt escort fighter/ figher-bomber. It sounds crazy but the twin engined Whilrwind actually had less frontal area than a Hawker Hurricane! Imagine the performance with a pair of +16lbs boosted Merlin 45s running at 1600hp.

I know that a derivative of the Wirlwhind, the Westland Welkin, was modified with high altitude Merlins, but that never saw any operational service and was more like a bunch of flaws with wings than a real aircraft.
 
the lancaster kicks ass said:
with regards to the lancasters mentioned........

the top picture is of the sole Swiss lancaster, the Tp-80 (formerly RA805, a Mk.I of the RAF) was aquired by the swiss in 1950, and was delivered in may 1951. She was modified by Avro at Hamble in the UK. A large pod was fitted under the fuselage to contain the jet engine and the underside of the fuselage was covered with stainless steel plating to resist the heat from the exhaust. For the same reason, the tailwheel was made retractable. A large control panel was installed in the radio operater's space

she was used to test numerous sweedish engines

unfortunatly she crashed in 1956, taking two of the 4 man crew with her.........

GREAT STUFF LANC!......

I worked for a company where we fitted a small jet engine to the right lower fwd. fuselage section of a B727. This was done for Honda. They are now looking to manufacture the engine and a small jet.
 

Users who are viewing this thread

Back