1/48 Airfix Gloster Javelin FAW 9/9R

[rochie]

Liking how this is coming together

 

[Gnomey]

Good work so far!

 

[Wurger]

 

[F-104nut]

Various subassembles primered with mr finishing surfacer 1500 primer . Wet sanded with Tamiya 1500 sanding sponge . For the metal i mixed a bottle of 50% Mr color super metallic super fine silver and 50% Tamiya LP-11 . Tail and underide of the back wing section was sprayed with Tamiy XF-54 Dark sea grey . FOD covers an d crew ladder sprayed with Tamiya tape . I decided to use the Armory Resin wheels on the build. They cleaned up pretty easy. I clipped tht nose strut axel off and drilled them out . Wheels will be attached with a metal pin in the end .

4F86A281-82C6-48BB-ADDB-AF2A91BB302E by b007scott, on Flickr

7B7F9423-0319-477B-8904-2501F67D95A4 by b007scott, on Flickr

56159111-9E97-4700-B8EA-61208E6932BC by b007scott, on Flickr

D836996B-D4DC-4C26-ABBB-5BA06B00D820 by b007scott, on Flickr

9C41289C-BBCB-43A4-9059-515626795976 by b007scott, on Flickr

9936084D-97EC-42ED-A554-F53437FCDC60 by b007scott, on Flickr

AFAD5FC0-4D18-49E0-BC7E-C31276489D2C by b007scott, on Flickr

3A62231E-51F2-40DC-B838-ECFF286BA426 by b007scott, on Flickr


Brian

 

[Vic Balshaw]

Nicely done.

 

[rochie]

really looks great.

being a brush painter, i may have to find a rattle can of suitable colour to do the undersides of this beast !

 

[Vic Balshaw]

Not wrong there Karl, it's a whole lot of aircraft.

 

[Wurger]

 

[Airframes]

I've got rattle can you can have Karl. It's Humbrol "Polished Aluminium" (enamel), but pretty close to RAF High Speed Silver.

 

[Gnomey]

Good work so far!

 

[F-104nut]

Spent a week getting the vertical and the tail wing painted. Sprayed first the Tamiya XF-54 Dark Sea Gray . Then I used a 0.5 mechanical pencil to draw the demarcation line for the camo . Free handed sprayed the Tamiya XF-811 RAF Dark Grren . On the trailing edge there is a small composite looking peice that was masked ioff and sprayed with a mix of Tamiya TAn and Tamiya Kakhi . Armory wheels was primed with Mr finishing surfacer 1500 .Wheel hubs sprayed with my metal mix and tired painted with mr colot tire black .

57BF8298-891A-4863-8D60-DF2C2B4FC68C by b007scott, on Flickr

0A202EC9-0CDC-4881-B830-F67B0F626618 by b007scott, on Flickr

7281D4C6-2134-4CFB-89FB-E3E6BDBE6299 by b007scott, on Flickr

CB08C7DB-87DD-4E1E-9404-9E0D188DDD1F by b007scott, on Flickr

21D3E6C4-5756-4271-ADFD-6AF8E89DB0FE by b007scott, on Flickr

FC60A9C7-30E4-4593-AC19-ABCE4B2BA6ED by b007scott, on Flickr

3972B796-2DEE-4AB7-81E5-EF278D3439D3 by b007scott, on Flickr

Brian

 

[Vic Balshaw]

Looking good and the panel lines are certainly well defined on this kit.

 

[Wurger]

 

[rochie]

very nice indeed

 

[Gnomey]

Good work so far!

 

[F-104nut]

Finally getting back on the Jaevlin build . Test fitted the tail to see how it looked after it was painted . Now i ready to start spraying clear gloss for decals . Need to finish the cockpit up next glued the lower window frames in the open position .

IMG_4854 by b007scott, on Flickr

IMG_4855 by b007scott, on Flickr

IMG_4856 by b007scott, on Flickr

IMG_4859 by b007scott, on Flickr

IMG_4860 by b007scott, on Flickr


Brian

 

[Wurger]

 

[Vic Balshaw]

The beast arises.

 

[Gnomey]

Nice work so far!

 

[buffnut453]

Always loved the "flying flat-iron" since I first built an old Frog kit of it when I was a nipper. I've been tempted to get the Airfix 1/48 kit but I don't know where I'd put it. That said, your beautiful build, F-104nut , isn't helping me crush the urges! Your photos really show off the quality of the mouldings.