For sure the fairing of the fuselage-horizontal stabilizer transition ...
BTW ... if we talk about such details .... the nose cone was made of a plywood / veneer. Generally of the wood.
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
For sure the fairing of the fuselage-horizontal stabilizer transition ...
BTW ... if we talk about such details .... the nose cone was made of a plywood / veneer. Generally of the wood.
And one more pic showing the assembling process of the Fw 200 ... you may notice not finished fairing of the fuselage-wing transition. Also the front parts of the engin nacelles with the engine attached. Notice the lack of their top rear parts at the wing top.
the source: Fw200ww – Focke-Wulf Fw 200 "Condor"
the source: Fw200ww – Focke-Wulf Fw 200 "Condor"
- Thread starter
- #43
I don't quite understand what kind of screw there is. Phillips screwdriver?
I don't quite understand what kind of screw there is. Phillips screwdriver?
- Thread starter
- #45
Was there a fairing on the engine housing?
What do you mean?
- Thread starter
- #47
Last edited:
OK. I have thought you meant that. Unfortunately I didn't see a pic showing the part with the angle you wanted. But If you have a look at the enlarged ones you should get the idea on how the fairing looked like. Actually the fairing both for the inner and the outer engine nacelles, was a part of the central wing leading edge. However these were of a slightly different size due to the wing dimensions at the areas. But always were covering the gap between the front round engine nacelle section and the wing leading edge. The parts crossfaded into the nacelle side at the bottom and the top rear fairing on the wing tops giving the smooth transition.
the inner engine ...
the outer engine ...
the pic source: Triebwerksintegration – Focke-Wulf Fw 200 "Condor"
the inner engine ...
the outer engine ...
the pic source: Triebwerksintegration – Focke-Wulf Fw 200 "Condor"
special ed
2nd Lieutenant
- 5,678
- May 13, 2018
I love to see old farts building/making old airplanes.
pinehilljoe
Senior Airman
- 743
- May 1, 2016
Are there any plans to fly her ?
- Thread starter
- #52
Do you have a photograph showing the stretching of the fabric onto the tail? Like on wings.
Attachments
The fin of the vertical tail was of the metal skin but there was a quite narrow vertical panels on both sides that were covered with the fabric patches. The rudder was of the metal "skeleton" like the aileron and was covered with the fabric quit tight. The trim tabs on the rudder had the metal covering.
the horizontal tail consited of the metal stabilizer skinned with the metal plates while the elevatrors were of the metal "skeleton" covered tight with the fabric. The trim tabs of the metal skin.
so the general view is like that ....
the pic source: Leitwerk – Focke-Wulf Fw 200 "Condor"
GregP
Major
Here's my drawing of it:
- Thread starter
- #55
Do you have photographs confirming the location of the joints of the metal sheets in the places I have highlighted?The fin of the vertical tail was of the metal skin but there was a quite narrow vertical panels on both sides that were covered with the fabric patches. The rudder was of the metal "skeleton" like the aileron and was covered with the fabric quit tight. The trim tabs on the rudder had the metal covering.
the horizontal tail consited of the metal stabilizer skinned with the metal plates while the elevatrors were of the metal "skeleton" covered tight with the fabric. The trim tabs of the metal skin.
View attachment 799941
View attachment 799943
View attachment 799944
so the general view is like that ....
the pic source: Leitwerk – Focke-Wulf Fw 200 "Condor"
- Thread starter
- #57
Do you have any pictures of the underside of the tail? I need photos of the horizontal stabilizers from below. I want to know the connection diagram of metal sheets.
It was in the similar way as for tops ...
the pic source: Höhenleitwerk – Focke-Wulf Fw 200 "Condor"
the pic source: Höhenleitwerk – Focke-Wulf Fw 200 "Condor"
special ed
2nd Lieutenant
- 5,678
- May 13, 2018
More great shots of old farts building new/old planes.
- Thread starter
- #60
Do you know a way to attach the places I have highlighted?
