Grumman Goose request

[Colin L]

Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin

 

[Snautzer01]

Manual section ?

 

[cvairwerks]

AirCorp may have the drawings in their library.

 

[ThomasP]

You might find some of what you are looking for here: "SEAWINGS - The Flying Boat web site"

They have very good Walk Arounds of 11 different Goose (Geese?) and a Manuals section. There is a photo of the bow anchor hatch in the manuals section.

 

[larrymc]

Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin

Avialogs lists an E&M manual for the G-21A.

 

[Big Jake]

AirCorps Library have a good set of Goose's manuals and drawings. For wing tip nav lights installation, for example, see Goose drawing 12300. You'll have everything you want (and more...)

 

[J4F-2]

Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin

I have an almost complete set of Goose drawings, but it would take some time to find what you want. There are hundreds of them.
As for going all out, I wouldn't bother with the cabin forward of the rear seats but add a floor, you can't see anything anyway, the windows are too small. The biggest thing needed in the cockpit are the throttles/mixture controls and visible overhead gauges, maybe a set of belts. The bow compartment could use some help, but not a lot there. A pressure tank for the flaps, a boat hook, mooring line and a folding anchor and a small narrow walkway up the middle from the cockpit. That's about it. The rest can be found in photos which I think I have. for that matter I might have photos of all of that instead of drawings.

 

[SaparotRob]

The Forum never ceases to impress.

 

[DBII]

I have a couple of photos on the British are Coming thread, entry #10.

 

[J4F-2]

Colin, these should get you started. Still looking for a couple more.

 

[Colin L]

Thanks, the 'Canada Goose' build is well underway now!

 

[Wurger]

 

[DBII]

Nice build.