Grumman Goose request (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Colin L

Airman
43
95
Nov 27, 2016
Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin
 
Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin
Avialogs lists an E&M manual for the G-21A.
 
AirCorps Library have a good set of Goose's manuals and drawings. For wing tip nav lights installation, for example, see Goose drawing 12300. You'll have everything you want (and more...)
 
Would anyone have a set of good drawings for the Grumman Goose?
Specifically, what I'm looking for is details on the nav light installation, landing light (if equipped) radio antenna and antenna wire locations, and a riveting pattern., also, any details on the interior of the bow mooring hatch compartment and the early military cabin interior.
I have a Czech Models 1/48 Goose that I'd like to go to town on.

Thanks,
Colin
I have an almost complete set of Goose drawings, but it would take some time to find what you want. There are hundreds of them.
As for going all out, I wouldn't bother with the cabin forward of the rear seats but add a floor, you can't see anything anyway, the windows are too small. The biggest thing needed in the cockpit are the throttles/mixture controls and visible overhead gauges, maybe a set of belts. The bow compartment could use some help, but not a lot there. A pressure tank for the flaps, a boat hook, mooring line and a folding anchor and a small narrow walkway up the middle from the cockpit. That's about it. The rest can be found in photos which I think I have. for that matter I might have photos of all of that instead of drawings.
 
Last edited:
Colin, these should get you started. Still looking for a couple more.
 

Attachments

  • 23.jpg
    23.jpg
    157.5 KB · Views: 22
  • scan0022 ac.jpg
    scan0022 ac.jpg
    484.9 KB · Views: 24
  • scan0020.jpg
    scan0020.jpg
    399.3 KB · Views: 22
  • scan0016 a.jpg
    scan0016 a.jpg
    180.4 KB · Views: 22
  • img761 cgs.jpg
    img761 cgs.jpg
    137.6 KB · Views: 23
  • img677 N68157 bow cleat.jpg
    img677 N68157 bow cleat.jpg
    67.2 KB · Views: 24
  • img155.jpg
    img155.jpg
    748.1 KB · Views: 23
  • G-211946.jpg
    G-211946.jpg
    88.3 KB · Views: 20
  • 429438577_o (2).jpg
    429438577_o (2).jpg
    126 KB · Views: 24
  • 429438422_o (2).jpg
    429438422_o (2).jpg
    190.3 KB · Views: 22
  • 24414f_bc20f35e400f489a90a21d370b6709b2.jpeg_srb_p_1024_678_75_22_0.50_1.20_0.00_jpeg_srb.jpg
    24414f_bc20f35e400f489a90a21d370b6709b2.jpeg_srb_p_1024_678_75_22_0.50_1.20_0.00_jpeg_srb.jpg
    129.5 KB · Views: 22
Thanks, the 'Canada Goose' build is well underway now!
 

Attachments

  • Image6.jpg
    Image6.jpg
    95.8 KB · Views: 9
  • Image7.jpg
    Image7.jpg
    91.8 KB · Views: 7
  • Image8.jpg
    Image8.jpg
    79.8 KB · Views: 7
  • Image10.jpg
    Image10.jpg
    96 KB · Views: 9
  • Image13.jpg
    Image13.jpg
    164.8 KB · Views: 8
  • Image14.jpg
    Image14.jpg
    41.8 KB · Views: 8
  • Image16.jpg
    Image16.jpg
    64.2 KB · Views: 8
  • Image17.jpg
    Image17.jpg
    99.4 KB · Views: 9
  • RCAF Goose 2.jpg
    RCAF Goose 2.jpg
    133.7 KB · Views: 11

Users who are viewing this thread

Back