Here is the D4Y-3 Judy.
In the pic below, you see the Judy in the foreground. In the background is the complete center section of the A6M5 Model 52 Zero on a trailer just prior to leaving for Japan. The wing and fuselage are one unit and do not come apart. To ship it, they take off the tail, remove the engine and mount the engine mount to another mount on the trailer. Then, they stack all the other parts around on the trailer.
You can see the tailhook sticking out the bottom of the Judy, and this is how we located the second bulkhead from the tail forward ... the tailhook had to retract and we placed the bulkhead so it would just retract. There were NO plans. About half of the skin around the wing root is original. From the firewall forward is all new.
View attachment 657869
Below is the first startup of the Judy after it was completed. Fighter Rebuilders used some old matching prop blades they had lying around, and Steve Hinton said it shook like a bucking bronco. So ... they had to balance the prop before the next startup and taxi session. Prior to that, they had all assumed the matching prop blades were all from the same prop. Apparently not! The bomb is fiberglass and the controls and the brakes all work. The gear is fixed down, but could easily be made to retract.
It is capable of taxiing and is operated maybe once a year or so.
View attachment 657870
Edit: The wing is mostly original, but the starboard wing from about 5 feet in from the tip had to be rebuilt. The left wing was the model. Yes, there is some new sheet aluminum on and in the wings, but I'd estimate the wings to be about 65 - 75% original. There is now only ONE fuel tank. Originally, there were five in the wings; a center tank and two outboard on each side. The landing gear is original but had to be repaired / restored so the wheels would turn and the brakes would work. Brakes are not original.