Unknown early control Wheel

BFreer

Airman
56
51
Joined
Sep 24, 2020
A friend purchased this control wheel a few years ago from a US dealer. It was sold as being from a British observation airship gondola/control car. It does not match .
Cleaning it and the main chain was made by Duckworth of Springfield in USA so most likely American and pre WW2.
The wooden wheel has strengthened/cracked over time. There are two part numbers on the reddish brown parts of C-483-1 and -2.

The wheel is ca. 12 inches diameter to the outside.
Total height is ca. 17 inches.

Does anyone recognize it or the part numbers ?

Not sure if it is a main pilots wheel or a side control wheel from a blimp or something else... Suggestions welcome.
 

Attachments

  • tempImageJxNxub.png
    tempImageJxNxub.png
    1.5 MB · Views: 38
  • tempImagemqApnU.png
    tempImagemqApnU.png
    11.8 MB · Views: 38
  • tempImageAKj41s.png
    tempImageAKj41s.png
    5.9 MB · Views: 41
  • tempImageMBU1Ei.png
    tempImageMBU1Ei.png
    2.9 MB · Views: 38
  • tempImageOY3qXt.png
    tempImageOY3qXt.png
    4.6 MB · Views: 45
  • tempImageKPHQrp.png
    tempImageKPHQrp.png
    8.2 MB · Views: 45
  • tempImageAkqo9L.png
    tempImageAkqo9L.png
    9.8 MB · Views: 46
Can't find one to match the column....moving on
 

Users who are viewing this thread

Back