- Thread starter
- #41
So after carefully studying the kit instructions to identify where a a cavity was located.
After a big gulp of air I drilled a hole that allowed some .22 air rifle pellets to be dropped in and superglued in place.
I softened some sprue and squashed the end to form a plug which has been glued in place to seal the hole.
Waiting for this to set properly before sawing and sanding flush.
After a big gulp of air I drilled a hole that allowed some .22 air rifle pellets to be dropped in and superglued in place.
I softened some sprue and squashed the end to form a plug which has been glued in place to seal the hole.
Waiting for this to set properly before sawing and sanding flush.