MikeGazdik
Senior Airman
I would LOVE to see those figures!! That had to be alot of work.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Hi Ivan
I know I'm being a bit slow here
so if I drew an imaginary line back through the bent section of the wing (looking at the a/c from head-on) and continued the line back into the cylindrical fuselage, it would - in 2D - pass through the centre of the circle created by the frontal aspect of the fuselage (the longeron datum line)?
I'm trying to get a fix on what this wing angle is at 90 degrees to, mating as it does to a cylindrical (fuselage) section.
Actually the cockpit was moved back for cg considerations. The bent wing affords a better view of the ground than say an f6f. This was an advantage as a ground support aircraft. The issue was the length of the nose not affording good visibility over the nose on landing. Although there really is no useful information over the nose on any landing.There is no question that the intersection of the Corsair wing root with the fuselage was cleaner than the intersection of the wing and fuselage of the Hellcat with the fairing that was needed. That was a part of the reason that the Corsair had better performance than the Hellcat with essentially the same engine. The design philosophy of the Corsair was to have the smallest and cleanest air frame possible married to the most powerful radial engine available. The R2800 was chosen not only because of it's power but because it was a twin row engine which gave it a relatively small cross section and the fuselage of the Corsair was round like the engine and therefore had a small cross section. The wing intersection was a side effect of the effort to make the landing gear shorter and therefore stronger. It was fortunate that the amount of propellor clearance created was generous because the later Corsairs needed a taller tail wheel strut for aerodynamic and visibility effects. The prototype Corsair had all fuel in the wings and the guns in the nose. The desire to relocate the guns into the wings and most of the fuel into the fuselage and keep the fuselage slender resulted in moving the cockpit aft about three feet in order to create room for the fuselage fuel tank in production models. The moving of the cockpit created visibility problems, especially at high AOAs. The Corsair, as with all AC, was a series of compromises. The resulting AC, considering it's time frame, was an engineering tour de force.
Don't fell bad. I've spent some time around a f4u-4b and I don't know what it is 90 degrees to either. The cross section is not round for the entire length of the cord.
The development of the Hellcat finalized after the example of a Zeke was recovered at Acutan in the Aleutian Islands and testing was accomplished. The wing was the primary change being enlarged to enhance maneuverability. This had the added effect of enhancing "flyability" and helped scores of new pilots to an easy transition to type.
...I believe that the story of the FAA being the first to tame the Corsair for carrier ops is a myth. If you study the chronology of Corsair ops in Dean, "America's Hundred Thousand," Blackburn's VF squadron had readied the Corsair for carrier ops before the FAA had even tried to operate the Corsair from carriers. In addition, there is a training film on Zeno's of the F4U1 which shows a field carrier landing employing the curving base and short final which has been credited to the FAA.