And regardless - this would not have been a game changer. There were plenty of other alloys that were used successfully in aircraft that dominated the Zero so it goes back to the fact that the Zero, although a great performer at the start of the Pacific War was not some leading edge design. It was quickly surpassed in performance and became quickly obsolete.
Errr, no, not even from a flimsy gun. 7075 offered advantages but wasn't the only reason why "most Japanese aircraft had better power to weight ratios than their contemporaries." The design of structure and weight saving design methods (stamped parts, milling some structural components, lightening holes in structure, minimal structural members to achieve maximum G loading, etc.) were part of the equation that helped achieve light weight but effected strength and durability. I can tell you at the end of the day 7075 was not much lighter than 6061 and depending on the application, 6061 was the better material. Bottom line you weren't saving that much weight by using 7075!
So your comment "the Allies didn't have the alloys or construction techniques necessary to build ultra light aircraft" is simply not true. The fact that 7075 was not available to the allies is irrelevant. There were plenty of allied designers who "could have" easily gone into a lightweight design concept but were not directed that way due to the mandate from their customers.
Lastly, the Zero, like many other Japanese combat aircraft of the period had terrible interchangeability characteristics. I think this included the Tojo and Jack.
Here a comparison of 7075 to 6061 that goes into laymen's explanations
This article presents a brief comparison of the properties, strength, and applications between 6061 and 7075 aluminum.
www.thomasnet.com
Again, thank you for a thoughtful comment. But you are reading things that I didn't want to write, perhaps because of my unclear writing and bad grammar.
Here's my point: The Zero had advanced technologies in it that the Allies didn't have. I mentioned 7075 because it was just one example. I didn't mention magnesium because it was a much poorer option compared to aluminum. And IIRC it required using electric arc welding to build into airframes and it was more expensive. I'm not sure why you bring it up as it was never adapted to mass manufacturing AFAIK for WW2 aviation... and I can only think of one prototype that used it.
But I do see your point that there were other lightweight materials that the Allies could have used in a prototype. My point, though, was that the Allied aviation industry was not suited to build ultralight fighters. (Although
tomo pauk did pretty much cripple my argument by mentioning the Spitfire MK I which was only slightly heavier, had more horsepower, etc... although it was at the expensive of firepower, range, etc..)
I did not mean to imply anything about component interchangeability, about 7075 being universally better than other aluminum alloys, or magnesium being a substitute for 7075 and I apologize for having made so many distracting side comments.
To recap, as with all mass produced components that go into an aircraft, 7075 was (just as you say) one of many techniques that the Japanese used to make their aircraft lighter. As I mentioned earlier, the Allies couldn't have built a lighter aircraft because they did not invest resources in it the way the Japanese did. Although I'm sure if the US wanted to, it could have built anything in a lab because they had the technical capacity to do almost anything.
Regarding 7075, according to Horikoshi, IIRC, it was primarily used in wing spars because of its tensile strength and light weight. So it wasn't used in the parts of the aircraft that needed ductility (as you say). But regardless, it was still one of many reasons Japanese aircraft weighed a lot less than Allied ones. (As an aside: I was under the mistaken impression that wing spars need quite a bit of ductility in order to avoid breaking and just going off my basic understanding of flight engineering, am not sure why 7075 received so much credit for being "30% lighter than alternatives" now that I think about it.)
Anyway, one last thing: i just want you to know that I respect your expertise and writing skill on this forum and my comment comes from a place of respect and admiration. Please don't take offense at anything that I've written as that is not my intent.
We can compare the Spitfire I with A6M2. Fully loaded, the former weighted 300 kg more, a good deal of it being that Merlin III was heavier than the Sakae 12 by 110-120 kg, and because of the presence of the liquid cooling system (another 150-200 kg?). Stick the Sakae on the Spitfire I istead of the Merlin it's ancilliaries and now it weights ~2350 kg instead of 2640 kg (5820 lbs) - between the A6M2a (2338 kg) and A6M2b (2421 kg).
(figures for the Zeros are without the drop tank, source is the Shinpachi's translation)
SAI 403 was good for 575 km/h - see
here.
Ah, thank you for the link that was amazing.
Regarding comparisons in weight, I don't think fully loaded is the best comparison as the A6M2 carried large amounts of fuel, whereas the Spitfire carried very little even compared to some of its European theater opponents. But even so, it's pretty obvious that the Spitfire was a very lightweight aircraft, as was the BF-109E. So clearly the Japanese construction technology used to achieve light weight wasn't a magic bullet. It just led to slightly lighter power loadings.