Just how big is the P-47

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

I'd like to see it compared with a Typhoon/Tempest. I don't reckon there'd be much in it.

German single seaters were notoriously small. The Luftwaffe even developed a flying suit specifically for them, the 'Kombination, Winter, fur Flugzeug mit beschranken Raumverhaltnissen' (abbreviated as KW FL bR/40).

Cheers

Steve
 
Wingspan: Typhoon 41' 7" P-47 D 40' 10" Tempest V 41' 0"

Length : Typhoon 31' 11" P-47 D 34' 10" Tempest V 33' 8"

Height : Typhoon 15'3" P-47 D 15' 7" Tempest V 16' 1"

Data from Mason (Typhoon/Tempest) and Dean's 'America's Hundred-Thousand' (P-47 D).

I'd check the scale on that super imposition. No doubt nonetheless that the P-47 was a BIG beast

Cheers

Steve

It also makes you wonder which of these two (if either) is the more accurately scaled.

 
Last edited:
According to Wikipedia:

Vs. the Hellcat?

Length F6F-5: 33' 7" vs P-47D: 36' 1"
Wing Span: F6F-5: 42' 10" vs P-47D: 40' 9"
Height: F6F-5: 13' 1" vs P-47D: 14' 8"
Wing Area: F6F-5: 334 ft^2 vs P-47D: 300 ft^2
Max T/O Weight: F6F-5: 15,415 lbs vs P-47D: 17,500 lbs

AHT provides a P-47D length that is in accord with Steve's value. 34' 10"
 
Last edited:
...another way to look at it...



Suprisingly similar in size, but definitely built for two different purposes.



Elvis
 
Hey Stona,

Isn't that pic a Tempest and P-47? Looks like Tempest with a mighty, if fast turning, Sabre ...

Yep. It's Hasegawa's 1/32 P-47 and PCM's 1/32 Tempest V. Dragged out of my display cabinet for a moment in the sun...or on my work bench

Obviously comparing models is not the same as comparing the real thing as I don't know how accurately scaled the two are. I doubt that either is miles out though.

Cheers

Steve
 
I was thinking the same…

vs. the Corsair according to AHT:

Length F4U-4: 33' 8" vs P-47D: 34' 10"
Wing Span: F4U-4: 40' 11.7" vs P-47D: 40' 9"
Height: F4U-4: 15' 1.25" vs P-47D: 14' 8"
Wing Area: F4U: 314 ft^2 vs P-47D: 300 ft^2
Max T/O Weight: F4U: 14,670 lbs vs P-47D: 17,500 lbs
 
Last edited:
So let me ask this question. WHY was the P-47 so large? I mean it had the same engine as the F4U and F6F, and while those planes are very similar it length, height, and wingspan, the Jug was heavier and had a much larger body. Was it for ruggedness? Was it to carry a larger payload? Was it to support the 8 x .50's?
 
The turbocharger is located behind the cockpit and the deep belly is all ducting to get the exhaust and fresh air toithe turbo and the compressed air back to the carburetor. The bottom 1/3 of the fuselage is pure ducting. Maybe that has something to do with the size.

The P-47N was a formidable opponent with heavy armamaent, high speed, and high altitude capabiilities.
 

As Greg has said it is to house the ducting for the turbo charger in part. It was to carry the extra pair of .50 cal guns (and ammo, 425rpg is over 250lbs for two guns) and in part the fuel. Early P-47s carried 55 gallons more than an F6F inside the plane.

Leaving external loads aside the P-47 was designed to carry a heavier war load at a higher altitude than the Navy planes.

Size of the airplane is determined by the initial engine, prop, useful load (weapons/fuel) and field characteristics. What they could cram in later with longer runways, 20-40% more power and better props had very little to do with the size of the airframe as designed.
 

Users who are viewing this thread