Picture of the day. (24 Viewers)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

WOW! I had never considered that a crew member would have to climb onto the upper wing with the engine running to hook up the cable to crane it back onboard. So did they climb the forward engine strut to get up top? With the prop spinning and the plane riding on the waves. Not for me!

Great question. I can only find one step so it appears to have been more hoist yourself up from just above the deck. I checked the lube diagram and that did not list any steps so I can safely say there was one step. That appears to be the total. I will see if I can find more.

1778453488495.png
 
From this picture where the standing crew member provides scale one step appears enough if there was one each side. It appears that the crewman only needed to sit on the leading edge to hook up. From Supermarine Walrus [GWR Nicholl]

View attachment 878304
That's still effin scary. One rogue wave and/or wind gust or whatever and into that prop. I'm notifying OHSA.
 
There are four cables and ends and from what the manual insinuates they are not permanently fitted. They are definitely stowed in the wing CC. However the IWM photo
OIP-1982188545.jpg below suggests that they were permanently fitted. It seems likely they were fitted when operating from ships but not fitted otherwise.

1778465378191.png


1778465994946.png


1778465737494.png


Photo the net
1778466546377.png


Photo the net
1778466344896.png


Gong back to the original photo I think there are two steps on the RH engine support strut.

1778466825334.png
 
Last edited:
Two V-156-Fs of Escadrille AB 1at Alprecht airfield Winter of 1939-40.The V-156-F was painted Semi-gloss Medium Gray overall with (from front) Blue, white and Red rudder stripes MUSE
Two V-156-Fs of Escadrille AB 1at Alprecht airfield Winter of 1939-40.The V-156-F was painted ...png
 

Users who are viewing this thread

Back