Spitfire controls

[Backwell]

Hello Folks! Would anyone have detailed drawings available, preferably with dimensions for the Spitfire control column?

 

[Crimea_River]

Maybe Darryl Tony Hill

 

[Rocketeer]

Bizarrely, to do detailed drawings would be difficult as it would require various sources of info unless a sim guy already has done it. The Mk5 manual has a good drawing, but no dims. If you can state what you need it for, it could reduce the number of dimensions you need. I can measure mine but that can take time so reducing number of dimensions best. Also need to specify if you need grip too?

 

[Backwell]

Bizarrely, to do detailed drawings would be difficult as it would require various sources of info unless a sim guy already has done it. The Mk5 manual has a good drawing, but no dims. If you can state what you need it for, it could reduce the number of dimensions you need. I can measure mine but that can take time so reducing number of dimensions best. Also need to specify if you need grip too?

I was going to build a working replica. I can duplicate parts if required..... It would make a very nice working item. I currently have more thane enough on my plate building a Merlin engined 1920's Sunbeam but its amazing what can be fitted in!

 

[Rocketeer]

I was going to build a working replica. I can duplicate parts if required..... It would make a very nice working item. I currently have more thane enough on my plate building a Merlin engined 1920's Sunbeam but its amazing what can be fitted in!

Nice project!

 

[Ghost_71]

Hi Backwell, not sure if this is allowed but here is a guy who has done exactly that. He has made the Spitfire spade/grip & the engine controls in 3D print you can down load & have printed or print yourself. This can be used on a pc with games like War Thunder of DCS. Its got a step by step kit & works well from what i see! Hope this helps

See: AuthentiKit - Modular Flight Control System