GregP
Major
Despite the fact that we are restoring one, the P-59 Airacomet was not a great plane. We have a flight report on our very tail number and, if you read it, you would not want to fly it ... at least not often.
I MUST give Bell their due. When the contract was signed, they didn't give Bell an engine or tell them the projected thrust. They gave them a big block of wood and said the engine would not be any larger. They didn't even indiacte the engine mount locations until after the design was mostly done.
If nothing else, the 66 Airacomets DID teach our piston pilots how to fly turbine aircraft before they transitioned into P-80's. Well, at least 64 of them did. Two had a head-on collision and didn't do much teaching atfer that. We have had at least two pilots who flew our tail number visit the museum. They were happy it would fly again and wanted to be there when it did, if they live that long ...
We hope it will fly in 2014 and it looks set to do that. The trailing edges are finally near the end of redesign / rebuild and new control cables are on order for the rudder (frayed cables inside near the braided loops at the rigging turnbuckle). When we get the controls rigged, it will be time to roll the YP-59A into Fighter Rebuilders, get it inspected / updated as required and on to the flight test program.
The majority of the restoration was done before I started on it 8 years ago, so I was helping with finishing touches, more or less. One "finishing touch," the sliding canopy, took 3 of us 2 1/2 years of Saturdays to build from scratch, with no drawings. A new windscreen was also a challenge as we had to make the solid metal top windscreen bow from a 6-inch diameter rod of 7075 Aluminum using a balsa piece as a model and carve it out on an old manual end mill. At Steve Hinton's suggestion, we used a Tigercat emergency canopy release modified to fit.
Hopefully I'll have some YP-59A pics when it rolls out ... I'd say the people who have worked on it, about 50 or so still around, are ALL very interested in seeing it fly. Many of them drove hundreds if not thousands of rivets and did the real legwork for this proiject. A great bunch of guys and all are quite ready to see it fly or at LEAST taxi before flight test. Once it is moving under it's own power, flight is just a matter of paperwork and money.
I MUST give Bell their due. When the contract was signed, they didn't give Bell an engine or tell them the projected thrust. They gave them a big block of wood and said the engine would not be any larger. They didn't even indiacte the engine mount locations until after the design was mostly done.
If nothing else, the 66 Airacomets DID teach our piston pilots how to fly turbine aircraft before they transitioned into P-80's. Well, at least 64 of them did. Two had a head-on collision and didn't do much teaching atfer that. We have had at least two pilots who flew our tail number visit the museum. They were happy it would fly again and wanted to be there when it did, if they live that long ...
We hope it will fly in 2014 and it looks set to do that. The trailing edges are finally near the end of redesign / rebuild and new control cables are on order for the rudder (frayed cables inside near the braided loops at the rigging turnbuckle). When we get the controls rigged, it will be time to roll the YP-59A into Fighter Rebuilders, get it inspected / updated as required and on to the flight test program.
The majority of the restoration was done before I started on it 8 years ago, so I was helping with finishing touches, more or less. One "finishing touch," the sliding canopy, took 3 of us 2 1/2 years of Saturdays to build from scratch, with no drawings. A new windscreen was also a challenge as we had to make the solid metal top windscreen bow from a 6-inch diameter rod of 7075 Aluminum using a balsa piece as a model and carve it out on an old manual end mill. At Steve Hinton's suggestion, we used a Tigercat emergency canopy release modified to fit.
Hopefully I'll have some YP-59A pics when it rolls out ... I'd say the people who have worked on it, about 50 or so still around, are ALL very interested in seeing it fly. Many of them drove hundreds if not thousands of rivets and did the real legwork for this proiject. A great bunch of guys and all are quite ready to see it fly or at LEAST taxi before flight test. Once it is moving under it's own power, flight is just a matter of paperwork and money.
Last edited: