Today's project:
Boost pump.
We are on city water but at least 35' above the main in the street. The neighborhood has pretty dismal pressure down there, about 45. I laid 500' of 1" poly x2 to get within 75' of the equipment room, two years ago when all this started.
View attachment 899761
The two in the trench are 1.25" conduit and a 3/4" poly for my dark fiber run to the gate.
So I get the meter installed finally and get about 38 PSI static pressure in the basement of a 3 level house. Just so much as flush a toilet and it drops to 28.
Needless to say the 2nd floor showering would be dismal.
We got a 1/2 HP Gould pump and a 4.4 gallon expansion tank and a 30~60 pressure switch mounted on strut and plumbed with Bra$$ fittings.
We cut it in right at the end of that 1" poly and I will pour some walls and build a cover for it.
I got it dialed in to run 50~70 PSI and the pressure is grand.
View attachment 899762
I do a lot of this stuff myself but I also had a ringer today. This guy did most of the work and I ran parts and wired it up.
He is an artist in copper, as seen in my equipment room.
View attachment 899765