1/32 Tamiya P-51D CALIF NG 1950"s
- Thread starter N4521U
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
T Bolt
Colonel
Wonderful work Bill
Crimea_River
Marshal
I agree.
- Thread starter
- #24
N4521U
Colonel
Thanks for the positives.......
I was not happy with the altered lengths of the gear legs.
And.... there was a slight twist, so the wheel was pointing right or left.
So since I had another fresh set of legs I altered with corrections.
On the left is the New leg showing the pivot point and the wheel in place in the well.
Right side you can see the leg is just too long .
Below are the old and new, just 2.5 silly mm's makes the difference.
Now it will look a bit better in the "going up" position and not making contact with the inner doors!!!!
I was not happy with the altered lengths of the gear legs.
And.... there was a slight twist, so the wheel was pointing right or left.
So since I had another fresh set of legs I altered with corrections.
On the left is the New leg showing the pivot point and the wheel in place in the well.
Right side you can see the leg is just too long .
Below are the old and new, just 2.5 silly mm's makes the difference.
Now it will look a bit better in the "going up" position and not making contact with the inner doors!!!!
Snautzer01
Honourably banned
- 38,254
- Mar 26, 2007
Isnt the left missing a brake line?
- Thread starter
- #27
N4521U
Colonel
Ohhhhhhh, it's not even painted!
Looks great so far Bill!
- Thread starter
- #29
N4521U
Colonel
I've got a lot of the tiny decals on.
Just finishing up the artwork for the ANG and serial decals.
But having trouble finding Star and Bar decals with the red stripe in the bar.
Of correct size that is. Have plenty of 48th scale!
Had to order a sheet of stars and bars!!!!!!! Dang!
So far...............
Just finishing up the artwork for the ANG and serial decals.
But having trouble finding Star and Bar decals with the red stripe in the bar.
Of correct size that is. Have plenty of 48th scale!
Had to order a sheet of stars and bars!!!!!!! Dang!
So far...............
Last edited:
Crimea_River
Marshal
That's looking very smart Bill.
Airframes
Benevolens Magister
Nice !
Nice work so far Bill!
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
Looks like NAA is building it. Nice.
le_steph40
Senior Master Sergeant
with all above Bill 
- Thread starter
- #36
N4521U
Colonel
Got my Fantasy Printing decals today, all Post War US star and bars of various sizes.
So the wings are 30" and the fuselage sides 35".
They do make some Nice decals. Held together very well, no cracking.
Thin enough when using Strong decal set the wen into the scoring real well.
And when fixed with Pledge, no edges or silvering. Can't say enough!
They do look noice!
So the wings are 30" and the fuselage sides 35".
They do make some Nice decals. Held together very well, no cracking.
Thin enough when using Strong decal set the wen into the scoring real well.
And when fixed with Pledge, no edges or silvering. Can't say enough!
They do look noice!
very nice Bill
Crimea_River
Marshal
Those should do you for a while.
Good work so far Bill!
