Nicely done so far!
1/48 F4F-4 #1 "Mighty Y's Fury"
- Thread starter Skywalker Jin
- Start date
MIflyer
Major
Then there are the belly windows.
MIflyer
Major
Did they provide the bicycle chain that cranks the gear? Probably hard to do in 1/48.
- Thread starter
- #44
Skywalker Jin
Airman 1st Class
- 233
- Oct 23, 2025
Bicycle chain is provided in this kit and the belly window will be painted Grumman Grey inside and outside.
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
Dang! That's some detail work.
- Thread starter
- #46
Skywalker Jin
Airman 1st Class
- 233
- Oct 23, 2025
The seam is sanded with the raised rivets masked.
I treat them by several types of sandpaper,knife and Mr cement Sp and light-cured CA(to fill the gap).
A small piece of plastic(from the sprue) is applied to fill a small pit.
And it's sanded.
The damaged detail is restored by pen knife and line carver.
After dealing with the seam,higher grid of sandpaper is applied to prepare for primer,my primer is 1500# so
I use 1200# to finish this step.
I treat them by several types of sandpaper,knife and Mr cement Sp and light-cured CA(to fill the gap).
A small piece of plastic(from the sprue) is applied to fill a small pit.
And it's sanded.
The damaged detail is restored by pen knife and line carver.
After dealing with the seam,higher grid of sandpaper is applied to prepare for primer,my primer is 1500# so
I use 1200# to finish this step.
