Aeroplane Maintenance and Operation series of books from early 40s

[MiTasol]

Volume 13 - Engines Part 3

I am off on holidays on Thursday and would like to get up to and including Volume 20 done by then. That will only leave Vols 21, 26 and 27 that I will have to do when I return and by then the Vol 8 (Link trainer) should be here.

 

[MiTasol]

Volume 14 -- Airframes Pt 3. Representitive types is a bit vague so I added page 1 of the Preface. The cover was bleached beyond use.

 

[Crimea_River]

Just noticed this thread. Outstanding, thank-you!

 

[MiTasol]

Volume 15 - Instruments part 2. Another "dead" cover.

 

[MiTasol]

Vol 16 -- Fuel and oil systems

 

[MiTasol]

Vol 17 -- Aeroplane radio equipment.

 

[MiTasol]

18 -- Carburettors part 2

 

[MiTasol]

Volume 19 - Auxiliary Equipment. A reprint, not a revision. The cover needed a lot of damage (and a little graffiti) edited out.

The only change probably is that the price of each volume has changed from 6 shillings to 7s 6d and the addition of volumes 21 to 27 in the list of publications. So far I only have volumes 21, 26 and what I believe is 27 of the additional volumes.

The State Library has one volume (22 or 23 - their catalogue does not list the vol #) and I will get that on interlibrary loan next year. That will leave only volumes 8, 22 or 23, 24 and 25 missing as I do not have them, or access to them, yet.

I will be able to recreate vol 8 link trainer once the magazine version of the book arrives in the new year.

 

[MiTasol]

Volume 20 - Airscrews Part 2

 

[tomo pauk]

MiTasol - would it be a problem to make high-resolution scans of the pages 38 to 40 (data tables for Britosl engines), as well as of the page 65 (schematics of the Hercules installation) of the manual 13, Aero engines pt.3, and post them here?

 

[MiTasol]

Hi Thomo

Fortunately I have the paperback magazine version of those pages which are on much better paper (but harder to scan) so here they are - same 600dpi I always use. Page 65 is the first page of vol 29 and the glue joint is uneven so I hope this will do.

 

[tomo pauk]

Most excellent, that you very much