RAGMAN
Airman
I was watching some of my videos and on the video it was stated that France bought P40's from the US. France had fallen and the order was picked up by Britain.So I was wondering if the P40 fought for Britain during the BOB? 
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
https://www.airforcehistory.hq.af.mil/EARS/Hallionpapers/battleofbritainsep98.htmStill he did not give up attempting to stave off Hitler overseas. Numerous examples suffice of Roosevelt's commitment to Churchill and the British cause. Eventually Churchill got his P-40's (and more besides), in time for fighting in the Western Desert, though not the Battle of Britain.
Early P-40 production and delivers were even more chaotic than that.AFAIK no they did not fly during the Battle of Britain. The first batch were the tomahawk I which was a base p-40. It had 4 guns and no sealing fuel tanks. The RAF designated those to training duties right away. In 1941 after the BOB they did use the Tomahawk mark IIa and IIbs. Equivalent to the p-40b and c but they used .303 caliber guns instead of the .30 caliber.
1. The Nose Guns Stays the Same
- Tomahawk Mk I (Baseline P-40): The bare-bones model. It was fast and agile because it was light, but it completely lacked pilot armor and self-sealing fuel tanks. The RAF found it suicide to fly against German Bf 109s over Europe, so they used it mostly for stateside training or low-risk desert scouting.
- Tomahawk Mk IIA (P-40B): The first "combat-ready" version. Curtiss added internal armor plates behind the pilot and a thick bullet-resistant windscreen. They added two .30-caliber guns to the wings to boost firepower.
- Tomahawk Mk IIB (P-40C / Hawk 81A-3): The heaviest Tomahawk. It introduced a completely new internal fuel system with better self-sealing rubber and structural plumbing underneath the fuselage to carry a mandatory external belly drop-tank.
On all Tomahawk variants (Mk I, Mk IIA, and Mk IIB), the two nose-mounted guns remained the heavy American .50-caliber (12.7mm) Browning M2. The British kept these because they valued the heavy hitting power, even though it meant they had to supply a unique ammunition size to those specific squadrons.
2. The Wing Guns Split
The wing guns are where the two countries differed completely:
- U.S. Army Air Forces (P-40B/C): Used standard American military .30-caliber ammunition.
- British RAF (Tomahawk Mk I/II): Re-bored at the factory to accept standard British .303-caliber ammunition. This allowed RAF armorers to use the exact same ammunition belts feeding their Supermarine Spitfires and Hawker Hurricanes.
Regarding the RAF Tomahawks, another of those 'myths' that will not die and that is not supported by any of the surviving documentation held in UK Archives, RAF Museum and similar archives. The US supplied 0.300in Browning MGs could not be 'rebored' to accept the standard British 0.303in calibre or round. There were more differences between the US 0.300in and the British 0.303in MGs other than the calibre. Casing length, rim design, feed mechanisms, ejectors, etc, all were different between the two. The RAF with the Tomahawk I, these being originally ordered for the French, had no armament supplied or fitted as they were to be fitted with French specification armament on arrival in France. So they had to have the mounts, case and link ejection chutes and other components modified so British 0.303in Browning MGs could be fitted and used. In the Tomahawk II, some retained the US supplied 0.300in MG armament, whilst some were modified - mounts, case and link ejection chutes, etc - to have RAF 0.303in Browning MGs fitted. Difference between a Tomahawk IIA and IIB in part is the armament fitted.
- U.S. Army Air Forces (P-40B/C): Used standard American military .30-caliber ammunition.
- British RAF (Tomahawk Mk I/II): Re-bored at the factory to accept standard British .303-caliber ammunition. This allowed RAF armorers to use the exact same ammunition belts feeding their Supermarine Spitfires and Hawker Hurricanes.
Regarding the RAF Tomahawks, another of those 'myths' that will not die and that is not supported by any of the surviving documentation held in UK Archives, RAF Museum and similar archives. The US supplied 0.300in Browning MGs could not be 'rebored' to accept the standard British 0.303in calibre or round. There were more differences between the US 0.300in and the British 0.303in MGs other than the calibre. Casing length, rim design, feed mechanisms, ejectors, etc, all were different between the two. The RAF with the Tomahawk I, these being originally ordered for the French, had no armament supplied or fitted as they were to be fitted with French specification armament on arrival in France. So they had to have the mounts, case and link ejection chutes and other components modified so British 0.303in Browning MGs could be fitted and used. In the Tomahawk II, some retained the US supplied 0.300in MG armament, whilst some were modified - mounts, case and link ejection chutes, etc - to have RAF 0.303in Browning MGs fitted. Difference between a Tomahawk IIA and IIB in part is the armament fitted.
The UK had ordered and paid for literally 'billions' of rounds of old stock US manufactured 0.300in and 0.50in ammunition to be used in the armament of US supplied aircraft and also to supply the British Army and Home Guard units receiving US manufactured rifles and MGs from US stocks. They also ordered and paid for a lot of new manufacture US specification 0.300in and 0.50in ammunition.
When the Tomahawks went to the RAF ACC Squadrons in the UK in early 1941, aircraft were allocated to units so that Tomahawks with the same armament type - US 0.300in or UK 0.303in - were sent to the squadrons so they all had the same armament within a squadron.
The 0.50in HMG nose guns took a little while to get sorted, main issues were around getting the nose synchroniser gear working at an acceptable level - issues in the UK with proper functioning of the electrical circuits, preventing moisture getting into the wiring, and getting the servicing equipment and procedures for the synchroniser gear in place.
The experience with the US 'mixed' armament of 0.300in MGs and 0.50in HMGs flowed through into the armament fitted to the NA-73 and NA-83 Mustang Is the UK purchased from NAA, so the RAF and the ACC Squadrons when they received them, were better set up to support and operate the new Mustangs with the US armament fitted. Again, RAF never swapped out the US 0.300in MGs for UK 0.303in MGs - another of those myths not supported by all the documentation, and recollections of the pilots and ground crew.
And in relation to the last Tomahawk IIA side profile illustration, Tomahawk IIA AH756, 'OE' squadron code is that of No.168 Squadron RAF, which was formed out of No.268 Squadron RAF in mid-1942. AH756 had been with 268, but was transferred to 168 on formation of that Squadron, Photos of the aircraft upon which the profile is based were taken whilst the aircraft was with 168.
AND, final part, the RAF ACC Squadron in the UK did use Tomahawks on operational sorties. They were used for a range of different operational sorties, including 'Jim Crow' shipping reconnaissance along the Dutch, Belgian and French coasts, coastal convoy escorts, and a number of sorties over the French coast where encounters with Luftwaffe fighters did occur.