Great work so far Glenn!
++ **** DONE: 1/48 P-63C - Military Conflicts of the 1950's
- Thread starter T Bolt
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
- Thread starter
- #42
T Bolt
Colonel
The PE seat and harness
The cockpit painting and weathering also finished
The cockpit painting and weathering also finished
fubar57
General
Innards look good Glenn
- Thread starter
- #45
T Bolt
Colonel
The finished cockpit. the gun sight didn't sag, its supposed to be tilted like that.
Glued into the right fuselage half along with a whole lot of lead nose weight
Fuselage glued together. Took a lot of clamps to make every thing work,but it looks like I'll get away with minimum filler on this joint.
Glued into the right fuselage half along with a whole lot of lead nose weight
Fuselage glued together. Took a lot of clamps to make every thing work,but it looks like I'll get away with minimum filler on this joint.
Last edited by a moderator:
JKim
Senior Master Sergeant
Interior looks good!
Crimea_River
Marshal
Good progress Glenn
Yep, good stuff Glenn....
Airframes
Benevolens Magister
Good stuff Glenn.
- Thread starter
- #52
T Bolt
Colonel
The wings are now on and all blended in. The second picture shows the most difficult area taking some plastic card, a lot of thick CA and a couple of hours of filing and sanding.
Crimea_River
Marshal
That's looking pretty nice Glenn.
Airframes
Benevolens Magister
I agree - it's taking shape nicely.
- Thread starter
- #56
T Bolt
Colonel
Thanks guys
More progress. The fuel tank, bomb and gun pilons put on along with the tail. All the seems have been smoother over and the entire airframe sanded down to 1000 grit paper. Have to decide now weather to go ahead with painting or tackle the vacuformed canopy first.
More progress. The fuel tank, bomb and gun pilons put on along with the tail. All the seems have been smoother over and the entire airframe sanded down to 1000 grit paper. Have to decide now weather to go ahead with painting or tackle the vacuformed canopy first.
fubar57
General
Looking good. In my hunt for sand paper the finest I could find was 800 grit in the 4x9 sheets. Seeing you mention 1000, I did a quick Google and found I've been looking in the wrong department all this time.....off to the automotive department at Canadian Tire the next time I hit PG. Many thanks Glenn
- Thread starter
- #58
T Bolt
Colonel
Yea George, I got some 1200 around here somewhere and I know I've seen it in 1500 but I think 1000 is enough for a NMF if you use a soft cotton cloth to polish it after. For clear parts though I've got some polishing pads that go up to - if i remember correctly - 12,000 grit, bit lately I've just been using my wife's finger nail polishing sticks for canopys
Looking good there Glenn...
Lovely work so far Glenn!
Users who are viewing this thread
Similar threads
- Sticky
