**** DONE: GB-53 1/32 Fw190F-8 - Eastern Front

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Donivanp

Captain
8,302
6,599
Feb 23, 2014
Katy Texas
Username : donivanp
First name : Don
Category : intermediate
Scale : 1/32
Manufacturer / Model : Revell Fw190F-8
Extras : Quinta Studios cockpit, Masters gun barrel set, Aires gun bay and Quickboost gun cover


20220203_195228_copy_800x433.jpg
 
Here's what the kit looks like.
Instruction book and suggested aircraft
20220204_154832_copy_600x800.jpg

Thinking hard about the first one (79) just because I like the bomb. Anyone who would put that much work into art that will never be seen once used, well that one crazy son well you know.
20220204_154852_copy_800x600.jpg

X2 ea for the next two trees.
20220204_153817_copy_800x561.jpg
20220204_153846_copy_800x612.jpg


20220204_154020_copy_800x424.jpg
20220204_154041_copy_800x600.jpg
20220204_154101_copy_800x600.jpg
20220204_154232_copy_800x600.jpg
20220204_154409_copy_800x600.jpg
20220204_154539_copy_800x600.jpg
20220204_154757_copy_800x600.jpg

Even includes a stand

20220204_154424_copy_800x600.jpg

Kit decals, while a small set they are good, printed in Italy
20220204_154921_copy_800x600.jpg
 
Oh and I do have an Eduard Brassin engine, it's a kit unto itself. I haven't really decided on it as looking at the kit it's self, seems half the build is the engine. I don't know yet lets see.
 
Instructions for the Eduard engine
 

Attachments

  • 632123.pdf
    12.1 MB · Views: 53
Getting started the instructions call for holes to be drilled in the lower wing section. I have chosen to do it with the out board bomb rack instead of the wing tanks. so I drilled according to the B plan.
20220209_114000.jpg

Next working out of order I started on the engine. The kit provides a pretty nice engine with out the Eduard selection, but after I got going I'm not so sure.
20220209_113942.jpg

Two rows of cylinders with just the inner section as the back. I cleaned up and attempted to mate the first set (aft I think row) and it was so tight I broke one cylinder off.
20220209_114133.jpg
20220209_114159.jpg

so I glued it back on and sanded the inner section down and retried and re-sanded etc... got it to fit but my sanding was not uniform and it doesn't look so good. If I don't open up the engine no biggie as even in thei scale it won't be seen.
20220209_114724.jpg

20220209_114121.jpg
 
Last edited by a moderator:

Users who are viewing this thread

Back