**** DONE: GB-64 1/32 P-51D - One Trick Pony

Neato.
 
Thanks Guys...

Lower fuselage Intake assembly, pipework engine to intake and fuselage panelling to cover the intake.....nice fit so far....

60_Fuselage Intake_E3300.jpg
61_Intake assy_E3302.jpg
62_Intake Assy_E3304.jpg
63_Lower fuselage Pipework__E3330.jpg
64_Lower Intake Cover_E3328.jpg
 
Nice watching you turn plastic into aviation grade aluminum.
 
Great work so far Wayne!
 
Love it. Some of those pipes will peek through the openings into the wheel well, just to remind you they are there.

Lots to do in 3 weeks Wayne....
 
Love it. Some of those pipes will peek through the openings into the wheel well, just to remind you they are there.

Lots to do in 3 weeks Wayne....
Yeah....I'm already thinking I need to put my hand up when you make the Call Andy....

anyway moving along....Tail bits assembled and in place, along with the port upper Cowling Panel.. I also added a few plasticard support pieces so the cowl sections would be well supported, as the panels are not real thick, the support pieces can be seen looking at the starboard side...
That first cowl piece fitted nice and snug...

65_Vertical tail_E3352.jpg
66_Tail Section_E3360.jpg
67_Port Cowl Cover_E3363.jpg
68_Port Cowl section_E3365.jpg
69_Stbd side_E3369.jpg
 
:thumbright:
 
Very nice Wayne
 
Very detailed kit which you're working wonders with. Is there options to display these areas at all?
Yes Greg there are separate frame Ribbing panels that can fitted around the engine assembly to leave all areas of the engine open.
 

Users who are viewing this thread

Back