**** DONE: GB-64 1/48 P-51D ( I ) - One Trick Pony

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Well Tamiya, ya screwed me, ya changed the formula of your XF-5 Green to a darker shade and my tried and true mix of yellow and green to get Interior Green for a half dozen or so times is no more. Now the green is too dark. It used to give me this, shown beside Mr. Hobby Interior Green

1731111950984.png

When I mixed up this batch, it gave me an apple green. I thought I screwed up the mix and threw it out and tried again; very costly for someone whose nearest paint source is a 4hr round trip. In a panic I started adding more yellow and finally a few drops of black. Not quite right for the colour police but good enough for me. Lucky that I've found a source now for Mr. Hobby Aqueous.

IMG_0001.JPG


IMG_0002.JPG


IMG_0004.JPG

I'll let this dry and start detailing
 
Thank you Terry. I suddenly dawned on me after I posted that it has been reported that Mr. Hobby has change their Interior Green formula and now it looks like Yellow Zinc Chromate so hopefully they correct that soon
 
Understanding that paint was a local mix and one batch may be lighter or darker than another, I think it looks good and having three different shades of interior green can't be all that bad.
 
I am not happy with that green so I spent about 7hrs looking for the actual formula. I finally found it, surprise...surprise....here in a thread that is 19yrs old, 10 parts yellow green to 1 part black. This got me close so I added a few more drops of black until I was happy. Now to start over...........
 
IMHO adding a drop or two of the yellow or a drop of the yellow and a drop of a white would be enough ... for the getting of the better tone of the XF-5 Green.

:thumbright:
 
Ahh .. perhaps some of a quite dark grey paint should be added then. If it is of a more bluish tinge a drop of the yellow should make it greenish and remove the bluish tone. With the grey should get the tone down.
 
Thanks Jesse. Seat is just posing. Weathered up the floor to show....hopefully, the wood under the rubber coating. Dry brushed dark grey over semi-gloss black to show wear on "leather" but not sure its working for me. Painted the sidewall details Nato Black and waiting for it to dry to start painting the smaller details

IMG_0003.JPG
 

Users who are viewing this thread

Back