Folker Tri-plane (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

DBII

Senior Master Sergeant
3,097
1,483
Oct 16, 2007
Conroe, Texas
I started a new build today. A Christmas present from my father.
 

Attachments

  • IMG_20230106_105504.jpg
    IMG_20230106_105504.jpg
    1.5 MB · Views: 25
  • IMG_20230106_105408.jpg
    IMG_20230106_105408.jpg
    1.4 MB · Views: 25
  • IMG_20230106_105443.jpg
    IMG_20230106_105443.jpg
    2 MB · Views: 23
Like any build, I started with the front office. Not much details in this one.
 

Attachments

  • IMG_20230106_111607.jpg
    IMG_20230106_111607.jpg
    1.8 MB · Views: 16
  • IMG_20230106_111703.jpg
    IMG_20230106_111703.jpg
    1.7 MB · Views: 19
  • IMG_20230106_111710.jpg
    IMG_20230106_111710.jpg
    1.3 MB · Views: 18
It took several tries before I could close up the fuselage. The control panel was a little wide and the tabs were to large. I finally got everything together but the seat is off center. I decided the finished plane would look better unpainted. The painted models look to much like a toy.
 

Attachments

  • IMG_20230106_113454.jpg
    IMG_20230106_113454.jpg
    1.9 MB · Views: 19
  • IMG_20230106_113504.jpg
    IMG_20230106_113504.jpg
    1.5 MB · Views: 17
  • IMG_20230106_113517.jpg
    IMG_20230106_113517.jpg
    1.7 MB · Views: 17
  • IMG_20230106_113528.jpg
    IMG_20230106_113528.jpg
    1.4 MB · Views: 14
  • IMG_20230106_113951.jpg
    IMG_20230106_113951.jpg
    1.8 MB · Views: 14
  • IMG_20230106_114003.jpg
    IMG_20230106_114003.jpg
    2 MB · Views: 18
  • IMG_20230106_114012.jpg
    IMG_20230106_114012.jpg
    1.7 MB · Views: 17
I'm intrigued with these little wood models, it's how the designers have managed to engineer this sort of click and hold. It should be a little fun build. :D
The good thing is I don't have to worry about filling seems. If I parts falls out, a little white glue. My wife's kitten did jump up on the table and ran off with the pilot's seat.
 
The good thing is I don't have to worry about filling seems. If I parts falls out, a little white glue. My wife's kitten did jump up on the table and ran off with the pilot's seat.
Meet Daisy Roswell, intergalactic space immigrant. Stealer of pens, coke tops, hard boiled eggs and my wife's heart. 7 months old, weighing in at 6 1/2 lbs. Found hiding between the grill and empty flower pot back in June.
 

Attachments

  • IMG_20221222_115310.jpg
    IMG_20221222_115310.jpg
    1.8 MB · Views: 11
I had time to complete step 3 today. Assemble the tail. Just a little sanding and everything feel into place. I did have a little trouble attaching the top of the fuselage. I may go back and try straighten out the pilot's seat. Next I will add the guns.
 

Attachments

  • IMG_20230109_122602.jpg
    IMG_20230109_122602.jpg
    1 MB · Views: 12
  • IMG_20230109_122532.jpg
    IMG_20230109_122532.jpg
    952.2 KB · Views: 12
  • IMG_20230109_122519.jpg
    IMG_20230109_122519.jpg
    934.8 KB · Views: 12
  • IMG_20230109_122101.jpg
    IMG_20230109_122101.jpg
    1.3 MB · Views: 11
  • IMG_20230109_122026.jpg
    IMG_20230109_122026.jpg
    1.3 MB · Views: 11
  • IMG_20230109_121953.jpg
    IMG_20230109_121953.jpg
    962.2 KB · Views: 11
  • IMG_20230109_121745.jpg
    IMG_20230109_121745.jpg
    1.9 MB · Views: 11
  • IMG_20230109_121413.jpg
    IMG_20230109_121413.jpg
    2 MB · Views: 11
  • IMG_20230109_121401.jpg
    IMG_20230109_121401.jpg
    2 MB · Views: 10
  • IMG_20230109_121732.jpg
    IMG_20230109_121732.jpg
    2.1 MB · Views: 9
  • IMG_20230109_121746.jpg
    IMG_20230109_121746.jpg
    1.9 MB · Views: 10
  • IMG_20230109_122101.jpg
    IMG_20230109_122101.jpg
    1.3 MB · Views: 10
  • IMG_20230109_122011.jpg
    IMG_20230109_122011.jpg
    1.4 MB · Views: 10
  • IMG_20230109_122528_1_BURST001_COVER.jpg
    IMG_20230109_122528_1_BURST001_COVER.jpg
    1.2 MB · Views: 9
  • IMG_20230109_122948.jpg
    IMG_20230109_122948.jpg
    1.6 MB · Views: 9
  • IMG_20230109_123009.jpg
    IMG_20230109_123009.jpg
    1.3 MB · Views: 11
Had a little free time and worked on my bird. The machine guns kept falling off. I started the engine and the fabric around the cockpit. The parts would not lay flat.
 

Attachments

  • IMG_20230201_162505.jpg
    IMG_20230201_162505.jpg
    1.1 MB · Views: 5
  • IMG_20230201_165134.jpg
    IMG_20230201_165134.jpg
    424 KB · Views: 4
  • IMG_20230201_165158.jpg
    IMG_20230201_165158.jpg
    1.2 MB · Views: 5
Here is the firewall and the engine. I had to rebuild the engine because I installed it upside down. Things are a little out of square.
 

Attachments

  • IMG_20230201_171940.jpg
    IMG_20230201_171940.jpg
    508.2 KB · Views: 5
  • IMG_20230201_171925.jpg
    IMG_20230201_171925.jpg
    437.5 KB · Views: 5
  • IMG_20230201_171904.jpg
    IMG_20230201_171904.jpg
    428.4 KB · Views: 6
  • IMG_20230201_171407~2.jpg
    IMG_20230201_171407~2.jpg
    399.5 KB · Views: 6
  • IMG_20230201_170008.jpg
    IMG_20230201_170008.jpg
    575.7 KB · Views: 6
I have attached the engine and repaired the parts that did not fit.
 

Attachments

  • IMG_20230201_173034.jpg
    IMG_20230201_173034.jpg
    1.4 MB · Views: 4
  • IMG_20230201_173024.jpg
    IMG_20230201_173024.jpg
    1.2 MB · Views: 4
  • IMG_20230201_174918.jpg
    IMG_20230201_174918.jpg
    1.3 MB · Views: 4
  • IMG_20230201_173034.jpg
    IMG_20230201_173034.jpg
    1.4 MB · Views: 4
  • IMG_20230201_173024.jpg
    IMG_20230201_173024.jpg
    1.2 MB · Views: 4
  • IMG_20230201_175039.jpg
    IMG_20230201_175039.jpg
    1.2 MB · Views: 4
  • IMG_20230201_180049.jpg
    IMG_20230201_180049.jpg
    1,012.2 KB · Views: 4
  • IMG_20230201_180112.jpg
    IMG_20230201_180112.jpg
    1,023 KB · Views: 4
  • IMG_20230201_180120.jpg
    IMG_20230201_180120.jpg
    733.6 KB · Views: 4

Users who are viewing this thread

Back