That Pit looks real nice David
GB-63 1/48 P-47D Thunderbolt - Stormy Weather
- Thread starter Totalize
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
- Thread starter
- #42
Totalize
Tech Sergeant
Oil cooler and gunsight added to the cockpit. Ready to be added to the fuselage.
Vic Balshaw
Major General
Nice steady progress. 
Nice work so far!
- Thread starter
- #46
Totalize
Tech Sergeant
Question for you p-47 Experts. My P-47D is Block 22 aircraft. Could these aircraft have either of the magnetos shown in the instructions? i have seen a restored P-47D with 1943 insignia (red band around the star and bar) and it had the round magnetos (C15) but most have the tear drop ones (C14)?
- Thread starter
- #47
Totalize
Tech Sergeant
Trying to do some layman's research and from what I have found so far. The R2800-21's had the flat ignition harness and part C15. The later ones like the -59's had a tubular harnesses and part C14 for the Magnetos or the Turtleback Magnetos.
Tubular Ignition harness seen on later R2800's with teardrop magnetos.
Tubular Ignition harness seen on later R2800's with teardrop magnetos.
le_steph40
Chief Master Sergeant
Maybe some infos:
"If you're building a bubbletop P-47D (-25 and later block number) the GE "turtleback" magneto's are correct for the R-2800-59, B series engine (pictured below). If you're building the Razorback then you'll want the bendix-scintilla magnetos for the B series R-2800's that came equipped in the Razorbacks. You did not mention which kit you were building so I'm attempting to cover all the possible options."
from infos here
"If you're building a bubbletop P-47D (-25 and later block number) the GE "turtleback" magneto's are correct for the R-2800-59, B series engine (pictured below). If you're building the Razorback then you'll want the bendix-scintilla magnetos for the B series R-2800's that came equipped in the Razorbacks. You did not mention which kit you were building so I'm attempting to cover all the possible options."
from infos here
- Thread starter
- #49
Totalize
Tech Sergeant
Thanks Steph. The Tamiya kit carries the tubular ignition harness seen in the black and white photo above so looks like I have to use the tear drop magnetos.
- Thread starter
- #50
Totalize
Tech Sergeant
Update Saturday.
Fuselage together after wet sanding, filling, sanding, priming, rescribing then rinse and repeat.
Fuselage together after wet sanding, filling, sanding, priming, rescribing then rinse and repeat.
fubar57
General
Moving quickly
Vic Balshaw
Major General
Nice work.
- Thread starter
- #54
Totalize
Tech Sergeant
Thanks guys much appreciated.
- Thread starter
- #55
Totalize
Tech Sergeant
Engine now complete.
fubar57
General
Wiring is very well done
- Thread starter
- #57
Totalize
Tech Sergeant
Thanks Geo. I used .3mm lead wire and I don't know if its old and got brittle but a lot wires cut to put in place broke in half rendering them too short to use.
Airframes
Benevolens Magister
Nice !
Jock Tamson
Staff Sergeant
Wowsers! that looks impressive.
le_steph40
Chief Master Sergeant
