captain Frey
Airman 1st Class
- 164
- Feb 18, 2012
Hello Steph,
It's very clean despite the complexity of the kit.
It's very clean despite the complexity of the kit.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Thanks Wojtek for your help. I agree with you and the interpretation by Eduard, why not red, it's very probable.The Eduard's suggestion for the camo of the Fw 190A6 is that the undersides of the engine cowling was the red. Although the yellow was the standard ID marking there that's possible Rudorffer as the commander of the II./JG54 could have the red colour there. Using of the red is also known from a couple of other images of the Fw 190As taken in 1944 and later. IIRC there is also a colour shot confirming that. Regarding the yellow on the bottom part of the rudder ... it can be found in other images of the JG54 Wurgers, especially on these servicing in Russia earlier and later moved to the Finland. But in the case I also have a doubt and it might have been the yellow colour wasn't there.
View attachment 873004
View attachment 873009
View attachment 873006
View attachment 873007
View attachment 873010
View attachment 873008
Thanks Wojtek for your help. I agree with you and the interpretation by Eduard, why not red, it's very probable.
But regarding RLM04 on the bottom part of the rudder, IMHO it was...
Here is a better quality photo![]()
View attachment 873011
As they say here, "sleep on it": I need to think twice, but I have my doubts. Does anyone have photo editing software that would allow me to clearly see if this small black outline is present? I tried modifying the photo (contrast, brightness, etc.) with Photos and PhotoFiltre… and it seems the small black outline is there; but am I seeing it because it's there or because I suspect it's there?Hello,
Decals in progress but I think there's a small error in Eduard's interpretation/profile. IMHO, the "double chevron & bar" have a little black outline...
Eduard decals
View attachment 874466
So, I think to use the Aeromaster decal sheet SP48-02 (the little "1" is on another sheet of this set.)
View attachment 874465
But I'm going to modify it a little (cut)
View attachment 874464
![]()
How much time do I have left to finish?![]()