GB-68 1/48 Fw-190A-8 - We all build Fw 190 (1 Viewer)

[rochie]

Nice work Andy

 

[fubar57]

Seams look great

 

[Vic Balshaw]

Like the jig.

 

[Crimea_River]

Seams look great

From where you are, yes.

There is some misalignment, even after all this.

 

[fubar57]

Well....I do have that whacking great mountain range in the way

 

[T Bolt]

Thanks guys.

One unintended consequence of gluing the gun covers on at this stage is that the wing uppers will not fit onto the fuselage if attached to the bottom half. As a result, I've had to glue the uppers to the fuselage first, which had the added benefit of being able to make sure the seam is as clean as possible. The patient is in traction as we speak:

View attachment 859629

Fingers crossed that the lower half will go on smoothly but I see no reason why not. Thanks for stopping by.

I glued the lower wing to the fuselage first, then the uppers, sliding the gun hatch into the side of the fuselage as I did. The wings fit together beautifully, so I don't think you will have a problem there. My problem was the gun hatch to the fuselage joint, but it looks like you have that one solved.