Recent Purchases (19 Viewers)

I p/u the 1/350 Zimi kit of the Atlanta class Light Cruiser San Diego CL-53 coming on the 20th a smart looking ship with 16 X 5inch on 8 turrets.The review below shows the smart looking ship. ;)

www.themodellingnews.com

Preview: 1/350th scale Atlanta & San Diego from Atori Bunka

Scale models, model reviews, tamiya, 1/32, 1/48th , aircraft modelling, model building, tank model, car model, figure model, 1/72nd scale, star wars,
www.themodellingnews.com www.themodellingnews.com
 

Attachments

  • zimat35013.jpg
    zimat35013.jpg
    61.7 KB · Views: 36
If you are using Alley Cat decals, even though the sheet says "F6F-5K" with the coloured tails, it looks like all but one are actually F6F-3Ks or maybe early -5s with the rear window. I built one here in 2016 and there are a few reference photos there if you need them
 
fubar57 said:
If you are using Alley Cat decals, even though the sheet says "F6F-5K" with the coloured tails, it looks like all but one are actually F6F-3Ks or maybe early -5s with the rear window. I built one here in 2016 and there are a few reference photos there if you need them
Click to expand...
I am using the Uprise decals. I have never used them. The photos would be helpful.
1451913-65156-82-1080.jpg
 

Attachments

  • 1447467-65156-18-1080.jpg
    1447467-65156-18-1080.jpg
    142.7 KB · Views: 26
Those are cool. I built Option 2 but the aircraft is more orange than pink. The reference photos must be in a different thread but here is a good shot of the antennae you need

--> **** DONE: 1/48 F6F-5K HELLCAT DRONE - Post-War Warbirds

....in the end I decide against using the P.E.. Finally got the port console done and both are now painted black awaiting the detailing. The tail gear strut was lengthened on the drone series so I set about correcting this. Finally found a good photo of the drone antenna. It looks like both...
ww2aircraft.net ww2aircraft.net
 
Just showed up. Got this to supplement my Ushci van der Rosten (UvdR) thread. I've heard the owner of the site is having health problems and people ordering from there are hit or miss getting orders filled. If you look closely at the arrow point you can see the thread. Handling UvdR is like handling spider web and half the time I've dropped it and didn't even know it. Hopefully this is a little more forgiving. These two spools should be all I will ever need; 45 metres here and probably 43 metres left on the UvdR spool

1771458874347.png
 
I have started a new NON AIRCRAFT project. A friend of mine has a 57 Chevy and I was asked to build a model of it. When he got it, I went to Deviant Art to see if I could commission a digital picture of his car. I found an artist whose style was just what I was looking for. The project was a complete success and was a huge hit when it was printed and framed. A year later, he contacted me that because of that print, Revell reached out to him to do some box art for them. To do this project, I have two Chevy kits, one is the better kit and the other is the box art which is a snap kit. It has a very specific wheel; hubcap; and tire combo and thanks to ebay; I was able to source everything I need.
bb2.jpg

bb1.jpg
bb3.jpg

I hope to get this done this year. I built a lot of car kits as a teenager, but I would rate them as the most difficult for me.
 
Last edited:
You must log in or register to reply here.

Users who are viewing this thread

Total: 20 (members: 0, guests: 20)
Back